Summary for Test 2024-02-05-10-13
Test performed: AASHTO T104-99r16Project Information
| Project Identifiers | Project ID: 66669 DEA: JMF-DATA EFIS: JMF-DATA |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for storing JMF sample data |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 02/05/2024 | Sample Unique Key | 10 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 02/05/2024 |
| Sample type | Quality Control | A brief description of the sample | 3/4" HMA-A w/ 25% RAP WM |
| The quantity of what the sample constitutes | 100% | From where was the sample collected | Supplier |
| First name of sampler or witnessed by | Vuong | Last name of sampler or witnessed by | Dao |
| Title of sampler | Not set | Telephone number of sampler | Not set |
| Laboratory sample identification | Not set | Linked DIME Sample ID | Not set |
| The fabricator/manufacturer/facility name | DeSilva Gates Aggregates-Sunol HMA | Transportation Laboratory (TL) Number | Not set |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
| Structure name | Not set | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-01-0007 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Not set | The fabricator/manufacturer designation for the sample | Not set |
| The plant number | Not set | A detailed description of where the material sample was collected | DeSilva Gates |
| Where the material sample would have been placed if not sampled | Not set | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Lot number | Not set | |
| Sublot number | Not set | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-02-05-10
DIME Test ID: 2024-02-05-10-13
Testing Lab: CT D04 - Pleasanton Field Laboratory
Test Method: AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)
Test Release Date: 2024-02-16
Test Results
Percentage of the total sample represented by each size
Size of aggregate being tested: Coarse and Fine Aggregate
What type of solution was used?:
What was the condition of the solution?:
Number of immersion cycles performed:
Input Type: Calculated
Tester's full name: Gallagher and Burk Materials
Date of test: 02/05/2024
Percentage of 2 ½ x 1 ½ material loss: no data
Percentage of 1 ½ x ¾ inch material loss: no data
Percentage of ¾ x ⅜ inch material loss: no data
Percentage of ⅜ inch x No. 4 material loss: no data
Percentage of No. 4 x 8 material loss: no data
Percentage of No. 8 x 16 material loss: no data
Percentage of No. 16 x 30 material loss: no data
Percentage of No. 30 x 50 material loss: no data
Coarse weighted average loss: no data
Fine weighted average loss: no data
General comments (publicly viewable) (Max 1000 characters): Submitted from JMF - Vuong Dao
Test was verified on 2/16/2024 ✔