DIME - Test Summary

Summary for Test 2017-01-26-15-1

Test performed: CTM 214-August 2010

Project Identifiers	Project ID: 211463 DEA: 060S3504 EFIS: 0614000115
DIST-CO-RTE-PM	06-KIN,FRE-5-21.6/26.7,0/2.3,10.9/14.9
Award Date	07/20/2016
Closeout Date	03/12/2020
Work Description	CONSTRUCT HIGH TENSION CABLE MEDIAN BARRIER.
Location Description	KINGS AND FRESNO COUNTIES NEAR KETTLEMAN CITY FROM 2.6 MILES NORTH OF MILHAM AVENUE OVERCROSSING TO 3.2 MILES SOUTH OF JAYNE AVENUE OVERCROSSING AND FROM EL DORADO AVENUE OVERCROSSING TO ROUTE 5/198 SEPARATION
QA Service Level	1 (Verified on 10/04/2016)

Sample Taken Date	01/26/2017	Sample Unique Key	15
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	02/14/2017
Sample type	Annual Source Testing	A brief description of the sample	1 x 4 PCC Aggregate
The quantity of what the sample constitutes	8 bags	From where was the sample collected	Source
First name of sampler or witnessed by	Mike	Last name of sampler or witnessed by	Holdridge
Title of sampler	TET	Telephone number of sampler	Unknown
Laboratory sample identification	17CPCC-0018	Linked DIME Sample ID	Unknown
The fabricator/manufacturer/facility name	Sierra Pacific - Avenal	Transportation Laboratory (TL) Number	C812802A
Inspector Lot Number from the Transportation Laboratory (TL) Form	Unknown	Structure unique identifier	Not set
Structure name	Not set	Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-10-0006
The fabricator's/manufacturer's product name for the sample	Unknown	The fabricator/manufacturer designation for the sample	Unknown
The plant number	Unknown	A detailed description of where the material sample was collected	Stockpile
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	1 inch
The concrete mix design number	Unknown	Lot number	Not set
Sublot number	Not set	Aggregate Mix Number	Not set

DIME Sample ID: 2017-01-26-15

DIME Test ID: 2017-01-26-15-1

Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory

Test Method: CTM 214-August 2010: Method of Test for Soundness of Aggregates by Use of Sodium Sulfate

Test Release Date: 2017-05-16

What size aggregate is being tested?: Coarse Aggregate

Input Type: Calculated

Tester's full name: Benjamin Lenz

Date of test: 05/09/2017

Percentage Loss of material retained on 2 x 1 ½ in. sieve: no data

Percentage Loss of material retained on 1 ½ x 1 in. sieve: no data

Percentage Loss of material retained on 1 x ¾ in. sieve: no data

Percentage Loss of material retained on ¾ x ½ in. sieve: no data

Percentage Loss of material retained on ½ x ⅜ in. sieve: no data

Percentage Loss of material retained on ⅜ in. x #4 sieve: no data

Percentage Loss of material retained on 2 in. through 1 1/2 in. sieve: no data

Percentage Loss of material retained on 1 in. through 3/4 in. sieve: no data

Percentage Loss of material retained on 3/4 in. through #4 sieve: no data

Weighted Average Percent Loss of Coarse Aggregate: 3.7 %

Batch Soundness Loss of Coarse Aggregate (2 1/2 in maximum): no data

Batch Soundness Loss of Coarse Aggregate (1 1/2 in maximum): no data

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 5/9/2017 ✔