DIME » All Projects » Project DEA: 010F8204 » Sample 2023-07-06-116 » View Test Details

Summary for Test 2023-07-06-116-4

Test performed: CTM 389-19

Project Information

Project IdentifiersProject ID: 993297
DEA: 010F8204
EFIS: 0116000067
DIST-CO-RTE-PM01-HUM-101-R90.1/109.6
Award Date01/27/2022
Closeout Date03/04/2024
Work DescriptionPLACE RHMA-G AND HMA (TYPE A).
Location DescriptionIN HUMBOLDT COUNTY IN AND NEAR TRINIDAD FROM 1.3 MILES SOUTH OF SCHOOL ROAD OVERCROSSING TO 0.4 MILE NORTH OF BIG LAGOON BRIDGE
QA Service Level1 (Verified on 10/12/2021)

Sample Information

Sample Taken Date07/06/2023 Sample Unique Key116
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing08/08/2023
Sample typeDispute Resolution A brief description of the sample12 boxes of 1/2-inch RHMA-G (PG 64-16 CR) with WMA
The quantity of what the sample constitutesJMF Verification From where was the sample collectedManufacturer
First name of sampler or witnessed byJon Last name of sampler or witnessed byAtturio
Title of samplerWitnessed by Jayce Brown Telephone number of sampler
Laboratory sample identificationD79313 Linked DIME Sample ID
The fabricator/manufacturer/facility nameMercer-Fraser — Plant B (Fortuna, CA) Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeRHMA-G
HMA Grading1/2 inch Lot number
Sublot number HMA Mix Number
Binder content (%)Not set Virgin binder PGNot set
Design binder PGNot set Binder SupplierNot set
RAP content (%)Not set WMA AdditivesNot set
Antistrip typeNot set

Test Details

DIME Sample ID: 2023-07-06-116
DIME Test ID: 2023-07-06-116-4
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Test Release Date: 2024-01-23

Test Results


Specified number of passes at 12.7 mm: 15000
Specimen Preparation Method:
Input Type: Measured
Tester's full name: Dennis Hickey
Date of test: 08/24/2023
Test Temperature: 122 F
Compaction Method: SGC Cylindrical Specimen
Air Void Content for specimen A-1: no data
Air Void Content for specimen A-2: no data
Air Void Content for specimen B-1: no data
Air Void Content for specimen B-2: no data
Stripping Inflection Point (Wheel A): >15000
Stripping Inflection Point (Wheel B): >15000
Maximum impression at 5000 passes (left wheel): 1.13 mm
Maximum impression at 5000 passes (right wheel): 1.11 mm
Average impression at 5000 passes (left/right avg): 1.12 mm
Maximum impression at 10000 passes (left wheel): 1.49 mm
Maximum impression at 10000 passes (right wheel): 1.52 mm
Average impression at 10000 passes (left/right avg): 1.51 mm
Maximum impression at 15000 passes (left wheel): 1.87 mm
Maximum impression at 15000 passes (right wheel): 1.87 mm
Average impression at 15000 passes (left/right avg): 1.87 mm
Maximum impression at 20000 passes (left wheel): no data
Maximum impression at 20000 passes (right wheel): no data
Average impression at 20000 passes (left/right avg): no data
Maximum impression at 25000 passes (left wheel): no data
Maximum impression at 25000 passes (right wheel): no data
Average impression at 25000 passes (left/right avg): no data
Raw Data: no data
General comments (publicly viewable) (Max 1000 characters): Nf>15000, SIP>15000

Test File Attachments

File NameExtensionFile SizeDate UploadedTest IDActions
D79313, ______, 01-0F8203, HWTpdf818.38 KB01/23/20242023-07-06-116-4   Info

Test was verified on 1/23/2024 ✔