Summary for Test 2023-11-17-4-4
Test performed: ASTM E415-21Project Information
| Project Identifiers | Project ID: 994864 DEA: 050N74U4 EFIS: 0522000025 |
|---|---|
| DIST-CO-RTE-PM | 05-SB-101-9.9/10.6 |
| Award Date | 07/10/2023 |
| Closeout Date | Not set |
| Work Description | SB 101 4D North San Ysidro to Olive Mill |
| Location Description | In Santa Barbara County in and near Santa Barbara from 0.1 mile south of San Ysidro Road Overcrossing to 0.1 north of Olive Mill Road Overcrossing |
| QA Service Level | 1 (Verified on 08/21/2023) |
Sample Information
| Sample Taken Date | 11/17/2023 | Sample Unique Key | 4 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/11/2024 |
| Sample type | Quality Assurance | A brief description of the sample | W24 x 146 FCM |
| The quantity of what the sample constitutes | 2 | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Steve | Last name of sampler or witnessed by | Hall |
| Title of sampler | CT METS QA INSPECTOR | Telephone number of sampler | 9152961869 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Lowers Welding and Fabrication | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | L134-110-23 | Structure unique identifier | |
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM6 - Steel Check Sample Plate | Heat Number(s) | 6014195113 |
|---|---|---|---|
| Material Specification | A572 | Grade | 50 |
| Thickness | 1.09 | Shape | Wide flange |
| Metal Foundry Manufacturer (Mill) | GERDAU Petersburg Va | Plate Dimension | 12" x 12.9" x 12.4" |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-11-17-4
DIME Test ID: 2023-11-17-4-4
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM E415-21: Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
Test Release Date: 2024-01-11
Test Results
Input Type: Measured
Tester's full name: Steven Paine
Date of test: 01/08/2024
Content, carbon: 0.0921 %
Content, Si: 0.220 %
Content, Mn: 1.09 %
Content, P: 0.0095 %
Content, S: 0.0267 %
Content, Cr: 0.114 %
Content, Mo: 0.0437 %
Content, Al: 0.0013 %
Content, Co: 0.0091 %
Content, Copper: 0.314 %
Content, Nb: 0.0142 %
Content, Ti: 0.00094 %
Content, V: 0.00076 %
Content, Lead: 0.0056 %
Content, Boron: 0.00073 %
Content, Fe: 97.8 %
Content, Ni: 0.153 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 1/11/2024 ✔