Summary for Test 2023-12-01-10-3
Test performed: ASTM D8225-19Project Information
| Project Identifiers | Project ID: 99999 DEA: 0322222 |
|---|---|
| DIST-CO-RTE-PM | 03-SAC,OMG-888,99,80-0.6-0.6 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
| Location Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
| QA Service Level | (Verified on 04/05/2013) |
Sample Information
| Sample Taken Date | 12/01/2023 | Sample Unique Key | 10 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 12/01/2023 |
| Sample type | Quality Control | A brief description of the sample | 0 |
| The quantity of what the sample constitutes | 0 | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | 0 | Last name of sampler or witnessed by | 0 |
| Title of sampler | 0 | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | 0 | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | |
| Sublot number | HMA Mix Number | ||
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-12-01-10
DIME Test ID: 2023-12-01-10-3
Testing Lab: CT HQ - Sacramento Materials Management Branch Field Office
Test Method: ASTM D8225-19: Standard Test Method For Determination Of Cracking Tolerance Index Of Asphalt Mixture Using The Indirect Tensile Cracking Test At Intermediate Temperature
Test Release Date: 2025-08-01
Test Results
Number of specimens: 2
Specimen Preparation method:
Input Type: Measured
Tester's full name: Michael Maksimovich
Date of test: 01/10/2024
| 1 | 2 | Average | Standard Deviation | Coefficient of Variability | ||
|---|---|---|---|---|---|---|
| 2 C | ||||||
| Condition Chamber | ||||||
| 6.5 % | 6.5 % | 6.5 % | 0 | 0 % | ||
| 62.0 mm | 62.0 mm | 62 mm | ||||
| 150.0 mm | 150.0 mm | 150 mm | ||||
| 1.1 mm | 1.1 mm | 1.1 mm | 0 | 0 % | ||
| kN | kN | Joules | % | |||
| 1 N/m | 1 N/m | 1 N/m | 0 | 0 % | ||
| 1 Joules/m^2 | 1 Joules/m^2 | 1 Joules/m^2 | 0 | 0 % | ||
| 0 Joules | 0 Joules | 0 Joules | 0 | 0 % | ||
| 1.0 | 1.0 | 1 | 0 | 0 % | ||
| 1.0 psi | 1.0 psi | 1 psi | 0 | 0 % | ||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/6/2025 ✔