Summary for Test 2023-12-15-30-4
Test performed: AASHTO T313-22Project Information
| Project Identifiers | Project ID: 994553 DEA: 032G7204 EFIS: 0322000151 |
|---|---|
| DIST-CO-RTE-PM | 03-YOL-113-R10.1/R10.8 |
| Award Date | 05/19/2023 |
| Closeout Date | 05/23/2025 |
| Work Description | JOINTED PLAIN CONC PVMT, INDIVIDUAL SLAB REPL, & REMOVE CONC PVMT. |
| Location Description | YOLO COUNTY IN WOODLAND FROM 0.1 MILE SOUTH OF EAST WOODLAND OVERHEAD TO 0.1 MILE SOUTH OF S5/S113 CONNECTOR UNDERCROSSING |
| QA Service Level | 1 (Verified on 05/15/2023) |
Sample Information
| Sample Taken Date | 12/15/2023 | Sample Unique Key | 30 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 12/15/2023 |
| Sample type | Quality Assurance | A brief description of the sample | 3/4" HMA-SP Oil |
| The quantity of what the sample constitutes | 1 Oil Can | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Mark | Last name of sampler or witnessed by | Mahoney |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Teichert Woodland | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 64-10 |
|---|---|---|---|
| Modified | Lot number | ||
| Sublot number | Tank number | ||
| Time of sample | HMA Supplier | ||
| Certified Asphalt Supplier | Pacific Northwest Oil - Stockton CA | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-12-15-30
DIME Test ID: 2023-12-15-30-4
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T313-22: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Test Release Date: 2024-01-05
Test Results
Input Type: Measured
Tester's full name: Raul Cardenas
Date of test: 01/05/2024
Minimum test bath temperature at 240 s: 0.0 C
Maximum test bath temperature at 240 s: 0.0 C
Time of test load application: no data
File name of test data: no data
Time beam in bath: no data
Time test started: no data
Flags issued by software during test: no data
Correlation coefficient (R²): 0
Regression coefficient a: no data
Regression coefficient b: no data
Regression coefficient c: no data
Load at time 0.0: 0.0 mN
Deflection at time 0.0 s: 0.000 µm
Load at time 0.5 s: 0.0 mN
Deflection at time 0.5 s: 0.000 µm
Load at 60.0 s: 0.0 mN
Beam deflection 60.0 s: 0.000 µm
Measured Stiffness Modulus 60.0 s: 29.400 MPa
Estimated Stiffness Modulus 60.0 s: 29.300 MPa
Difference between stiffness moduli 60.0 s: no data
Estimated m-value 60.0 s: 0.411
General comments (publicly viewable) (Max 1000 characters): BBR
Test was verified on 1/5/2024 ✔