Summary for Test 2023-09-22-99-2
Test performed: AASHTO T209-22Project Information
| Project Identifiers | Project ID: 994617 DEA: 112N1664 EFIS: 1122000153 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-79-44.7/53.0 |
| Award Date | 05/18/2023 |
| Closeout Date | 06/11/2024 |
| Work Description | COLD PLANE, RHMA OVERLAY, PAVEMENT MARKING, & RUMBLE STRIP. |
| Location Description | SAN DIEGO COUNTY NEAR SUNSHINE SUMMIT FROM 1.2 MILES NORTH OF ACORN CREEK BRIDGE TO RIVERSIDE COUNTY LINE |
| QA Service Level | 1 (Verified on 11/30/2023) |
Sample Information
| Sample Taken Date | 09/22/2023 | Sample Unique Key | 99 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 09/27/2023 | Sample type | Quality Assurance |
| A brief description of the sample | 1/2" RHMA-O | The quantity of what the sample constitutes | 2 boxes 1 bag |
| From where was the sample collected | Source | First name of sampler or witnessed by | Jesse |
| Last name of sampler or witnessed by | Fuentes | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | 9607-A | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Martin Marietta | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
|---|---|---|---|
| HMA Grading | 1/2 inch | Lot number | |
| Sublot number | HMA Mix Number | 53417105 | |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-09-22-99
DIME Test ID: 2023-09-22-99-2
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Test Release Date: 2024-01-05
Test Results
Number of Samples: 1
What is the unit of measurement for theoretical density?: US Units
Mass Determination: Air
Input Type: Measured
Tester's full name: Daniel Smith / J Seymour
Date of test: 01/02/2024
Method Performed: Mechanical Agitation - Method A
Mass of container filled with water 1: 7477.1 grams
Mass of oven-dry sample in air for Sample 1: 2510.6 grams
Mass of container filled with the sample and water for Sample 1: 8963.9 grams
Temperature of Water: 77 °F
Specific Gravity for Sample 1: 2.452
Theoretical maximum density at 25°C (77°F): 152.6 lb/ft^3
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 1/5/2024 ✔