Summary for Test 2023-09-22-98-1
Test performed: AASHTO T27-14Project Information
| Project Identifiers | Project ID: 994617 DEA: 112N1664 EFIS: 1122000153 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-79-44.7/53.0 |
| Award Date | 05/18/2023 |
| Closeout Date | 06/11/2024 |
| Work Description | COLD PLANE, RHMA OVERLAY, PAVEMENT MARKING, & RUMBLE STRIP. |
| Location Description | SAN DIEGO COUNTY NEAR SUNSHINE SUMMIT FROM 1.2 MILES NORTH OF ACORN CREEK BRIDGE TO RIVERSIDE COUNTY LINE |
| QA Service Level | 1 (Verified on 11/30/2023) |
Sample Information
| Sample Taken Date | 09/22/2023 | Sample Unique Key | 98 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/27/2023 |
| Sample type | Quality Assurance | A brief description of the sample | 1/2" RHMA-O |
| The quantity of what the sample constitutes | 2 boxes 1 bag | From where was the sample collected | Source |
| First name of sampler or witnessed by | Jesse | Last name of sampler or witnessed by | Fuentes |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 9606-A | Linked DIME Sample ID | 2023-09-22-97 |
| The fabricator/manufacturer/facility name | Martin Marietta | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | N/A |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-09-22-98
DIME Test ID: 2023-09-22-98-1
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2024-01-05
Test Results
What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Measured
Tester's full name: Daniel Smith / J Seymour
Date of test: 01/02/2024
| Cumulative Mass Retained | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 2791.0 grams | ||||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 62.0 grams | 98 % | |||||
| 426.0 grams | 85 % | |||||
| 1781.0 grams | 36 % | |||||
| 516.5 grams | ||||||
| 258.1 grams | 18 % | |||||
| 298.8 grams | 15 % | |||||
| 378.2 grams | 10 % | |||||
| 411.0 grams | 7 % | |||||
| 435.3 grams | 6 % | |||||
| 466.9 grams | 3.5 % | |||||
| 458.6 grams | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 1/5/2024 ✔
