Summary for Test 2023-12-12-38-1
Test performed: ASTM C39-21Project Information
| Project Identifiers | Project ID: 994191 DEA: 081G8304 EFIS: 0816000079 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-40-R100.8/R101.8 |
| Award Date | 02/07/2023 |
| Closeout Date | 08/29/2025 |
| Work Description | HMA, STRUCTURAL CONC, BAR REINFORCING STEEL, CRSP & IMPORTED BORROW. |
| Location Description | SAN BERNARDINO COUNTY AT ESSEX FROM 1.1 MILES EAST OF ESSEX ROAD OVERCROSSING TO 0.5 MILE EAST OF HALFWAY HILLS WASH BRIDGE |
| QA Service Level | 1 (Verified on 03/30/2023) |
Sample Information
| Sample Taken Date | 12/12/2023 | Sample Unique Key | 38 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 12/18/2023 | Sample type | Quality Assurance |
| A brief description of the sample | 4X8 | The quantity of what the sample constitutes | 6 |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | AMBER |
| Last name of sampler or witnessed by | C | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | 1053-12 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | SKANSKA | |
| Transportation Laboratory (TL) Number | 12 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Concrete | The concrete mix design number | 1629102 |
|---|---|---|---|
| The truck number from where the sample was collected | The batch plant ticket number from where the sample was collected | 48100064 | |
| Concrete batch plant | The fabricator/manufacturer designation for the sample | ||
| A detailed description of where the material sample was collected | JOB | Where the material sample would have been placed if not sampled | |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-12-12-38
DIME Test ID: 2023-12-12-38-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: ASTM C39-21: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Test Release Date: 2023-12-26
Test Results
Unit system used?: US Units
Number of specimens: 2
Test performed: With density determined by dimension measurements
Input Type: Measured
Tester's full name: Matthew Clayton
Date of test: 12/26/2023
In air mass of cylinder 1: 8.21 lb
In air mass of cylinder 2: 8.36 lb
Length of cylinder 1: 8.00 in
Length of cylinder 2: 8.00 in
Average diameter of cylinder 1: 4.00 in
Average diameter of cylinder 2: 4.00 in
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Density of cylinder 1: 142 lb/ft^3
Density of cylinder 2: 144 lb/ft^3
Average cylinder density (to nearest 1 pcf): 143 lb/ft^3
Serial number of delivery ticket, if available: no data
General comments (publicly viewable) (Max 1000 characters):
Test File Attachments
| File Name | Extension | File Size | Date Uploaded | Test ID | Actions |
|---|---|---|---|---|---|
| Comp. Strength Report1053-12 | 204.60 KB | 12/26/2023 | 2023-12-12-38-1 | Info |
Test was verified on 12/26/2023 ✔