Summary for Test 2023-12-14-33-1
Test performed: CTM 670-December 2013Project Information
| Project Identifiers | Project ID: 993446 DEA: 120J34U4 EFIS: 1218000034 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-55,55-29.6,R6.4/10.3 |
| Award Date | 05/27/2022 |
| Closeout Date | Not set |
| Work Description | CONSTR BRIDGES, RW, SW, JPCP, HMA PVMT, DRAINAGE AND ELECT SYSTEMS. |
| Location Description | ORANGE COUNTY IN IRVINE, SANTA ANA, AND TUSTIN ON ROUTE 5 AT NEWPORT AVENUE UNDERCROSSING AND ON ROUTE 55 FROM 0.4 MILE NORTH OF ROUTE 55/405 SEPARATION TO 0.1 MILE SOUTH OF ROUTE 5/55 SEPARATION |
| QA Service Level | 1 (Verified on 06/24/2022) |
Sample Information
| Sample Taken Date | 12/14/2023 | Sample Unique Key | 33 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/18/2023 |
| Sample type | Quality Assurance | A brief description of the sample | Hoops |
| The quantity of what the sample constitutes | 1234 | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Joaquin | Last name of sampler or witnessed by | Moreno |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Cascade | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM5 - Welded Hoops | Production or Authorization Testing | Production Testing |
|---|---|---|---|
| Service or Ultimate | Ultimate | Rebar Heat Number(s) | 273422 |
| Hoop Manufacturer Lot Number(s) | 16 and 20 | Material Standard Code | ASTM A706 |
| Material Grade | 60 | Rebar Size | #6 |
| Diameter of Hoop | 1'-6" | Epoxy Coated | No |
| Epoxy Coating Color | NA | Rebar Manufacturer | Cascade |
| Welding Company | RKR Steel Welding | Coating Standards | Uncoated |
| Weld Type | Flash Welded |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-12-14-33
DIME Test ID: 2023-12-14-33-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile)
Test Release Date: 2023-12-28
Test Results
Number of Samples: 6
Input Type: Measured
Tester's full name: Andrew Auvinen
Date of test: 12/19/2023
UTM: 400KIP
Temperature: 72 f
| Num | Sample | Mfg. Lot Number(s) | Size | Area (sqin) | Peak Load (lbf) | Peak Stress (psi) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 1 | 16 | 6 | 0.44 | 41493.87 | 94304 | Ok Necking | A Auvinen |
| 2 | 2 | 16 | 6 | 0.44 | 41478.96 | 94270 | Ok Necking | A Auvinen |
| 3 | 3 | 16 | 6 | 0.44 | 41644.95 | 94648 | Ok Necking | A Auvinen |
| 4 | 1 | 20 | 6 | 0.44 | 42041.57 | 95549 | Ok Necking | A Auvinen |
| 5 | 2 | 20 | 6 | 0.44 | 41978.46 | 95406 | Ok Necking | A Auvinen |
| 6 | 3 | 20 | 6 | 0.44 | 41967.91 | 95382 | Ok Necking | A Auvinen |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/28/2023 ✔