Summary for Test 2023-10-03-105-2
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 993804 DEA: 043J0624 EFIS: 0419000534 |
---|---|
DIST-CO-RTE-PM | 04-SM-101-16.5/23.0 |
Award Date | 08/24/2022 |
Closeout Date | 04/10/2024 |
Work Description | COLD PLANE AND PLACE HMA, REPLACE GUARDRAIL AND CURB RAMPS. |
Location Description | SAN MATEO COUNTY AT VARIOUS LOCATION FROM BROADWAY OVERCROSSING TO 0.2 MILE NORTH OF OYSTER POINT BOULEVARD OVERCROSSING |
QA Service Level | 1 (Verified on 05/19/2022) |
Sample Information
Sample Taken Date | 10/03/2023 | Sample Unique Key | 105 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/04/2023 |
Sample type | Quality Assurance | A brief description of the sample | 3/4 RHMA-G Cold Feed Aggregate |
The quantity of what the sample constitutes | 750 Tons | From where was the sample collected | Supplier |
First name of sampler or witnessed by | Holie | Last name of sampler or witnessed by | Sada |
Title of sampler | Plant QC | Telephone number of sampler | |
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Vulcan-Pleasanton | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Lot 2 Sublot 5 | Structure unique identifier | |
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-01-0010 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | 226108 | The fabricator/manufacturer designation for the sample | |
The plant number | A detailed description of where the material sample was collected | Plant Sampler | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
The concrete mix design number | Lot number | 2 | |
Sublot number | 5 | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-10-03-105
DIME Test ID: 2023-10-03-105-2
Testing Lab: CT D04 - Hayward Field Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2023-12-22
Test Results
What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Measured
Tester's full name: Luis Magana
Date of test: 10/04/2023
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
5593 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
65.0 grams | 99 % | |||||
785.0 grams | 86 % | |||||
1715.0 grams | 69 % | |||||
3280.0 grams | 41 % | |||||
510 grams | ||||||
264.0 grams | 20 % | |||||
365.0 grams | 12 % | |||||
406.0 grams | 8 % | |||||
435.0 grams | 6 % | |||||
461.0 grams | 4 % | |||||
474.8 grams | 2.8 % | |||||
475.3 grams |
General comments (publicly viewable) (Max 1000 characters): Lot 2 Sublot 5
Test was verified on 12/22/2023 ✔