Summary for Test 2023-11-03-45-1
Test performed: AASHTO T275-07r12Project Information
| Project Identifiers | Project ID: 993192 DEA: 024H4404 EFIS: 0218000119 |
|---|---|
| DIST-CO-RTE-PM | 02-PLU-70-0.0/29.9 |
| Award Date | 02/10/2022 |
| Closeout Date | 05/15/2024 |
| Work Description | CONSTRUCT SOLDIER PILE RETAINING WALL, REPAIR RSP AND HMA PAVING. |
| Location Description | PLUMAS COUNTY AT VARIOUS LOCATIONS FROM BUTTE COUNTY LINE TO 3.1 MILES WEST OF ROUTE 89 |
| QA Service Level | 1 (Verified on 08/23/2021) |
Sample Information
| Sample Taken Date | 11/03/2023 | Sample Unique Key | 45 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 11/09/2023 | Sample type | Department Acceptance |
| A brief description of the sample | 3 HMA Cores | The quantity of what the sample constitutes | Up to 750 tons (250 tons per core) |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | Dawn and Destry |
| Last name of sampler or witnessed by | Sloatermen and Garcia | Title of sampler | TET |
| Telephone number of sampler | Laboratory sample identification | D79383 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Q&D Construction - Mustang Hot Plant | |
| Transportation Laboratory (TL) Number | 867327 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 1/2 inch | Lot number | 1 |
| Sublot number | 6 | HMA Mix Number | |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-11-03-45
DIME Test ID: 2023-11-03-45-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Test Release Date: 2023-11-21
Test Results
Number of tests: 3
What test procedure is performed?: Method A
Input Type: Measured
Tester's full name: Josh Murphy
Date of test: 11/20/2023
| 1 | 2 | 3 | |
|---|---|---|---|
| 1157.2 g | 1280.5 g | 1227.7 g | |
| 1168.8 g | 1294.2 g | 1239.7 g | |
| 670.4 g | 736.8 g | 696.3 g | |
| 0.9 | 0.9 | 0.9 | |
2.383 | 2.362 | 2.316 | |
2.354 |
General comments (publicly viewable) (Max 1000 characters): All cores were cut to approximately 0.25′;
Gmba=2.383, Ha=0.23′;
Gmbb=2.362, Hb=0.26′;
Gmbc=2.316, Hc=0.25′
Test was verified on 11/21/2023 ✔