Summary for Test 2023-09-19-67-2
Test performed: CTM 217-June 2011Project Information
| Project Identifiers | Project ID: 215336 DEA: 051G9804 EFIS: 0516000009 |
|---|---|
| DIST-CO-RTE-PM | 05-SLO-1-10.0/16.8 |
| Award Date | 12/19/2022 |
| Closeout Date | Not set |
| Work Description | RHMA (GAP GRADED), RETAINING WALL, CURB RAMPS AND LIGHTING SYSTEMS. |
| Location Description | SAN LUIS OBISPO COUNTY FROM GRACIA WAY AT OCEANO TO ROUTE 1/101 SEPARATION IN PISMO BEACH. |
| QA Service Level | 1 (Verified on 11/18/2020) |
Sample Information
| Sample Taken Date | 09/19/2023 | Sample Unique Key | 67 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/19/2023 |
| Sample type | Quality Assurance | A brief description of the sample | 3/4" RHMA-G |
| The quantity of what the sample constitutes | Up to 750 Tons | From where was the sample collected | Supplier |
| First name of sampler or witnessed by | Isaac | Last name of sampler or witnessed by | Gleffe |
| Title of sampler | ARET | Telephone number of sampler | 18053191237 |
| Laboratory sample identification | 230919A | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Calportland-Garey | Transportation Laboratory (TL) Number | C230919A |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | 1 | Structure unique identifier | |
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-42-0014 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | .75in coldfeed | The fabricator/manufacturer designation for the sample | L1SL01 |
| The plant number | Calportland Garey | A detailed description of where the material sample was collected | Belt Discharge |
| Where the material sample would have been placed if not sampled | HWY 1 Pismo Beach | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Lot number | 1 | |
| Sublot number | 1 | Aggregate Mix Number | D1215H530 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-09-19-67
DIME Test ID: 2023-09-19-67-2
Testing Lab: CT D05 - Santa Maria Field Laboratory
Test Method: CTM 217-June 2011: Method of Test for Sand Equivalent
Test Release Date: 2023-11-20
Test Results
Number of tests: 3
Input Type: Calculated
Tester's full name: Isaac Gleffe
Date of test: 11/17/2023
Temperature correction: 0
Temperature of solution: 70
Clay reading (test 1): 6.2
Sand reading (test 1): 3.5
Clay reading (test 2): 5.8
Sand reading (test 2): 3.5
Clay reading (test 3): 6.2
Sand reading (test 3): 3.5
Sand equivalent (test 1): 57
Sand equivalent (test 2): 61
Sand equivalent (test 3): 57
Sand equivalent before temperature correction: 58
Sand equivalent after temperature correction: 58
General comments (publicly viewable) (Max 1000 characters): L1SL01 Continued SE.
Test was verified on 11/20/2023 ✔