Summary for Test 2023-11-02-40-1
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 994785 DEA: 023H32U4 EFIS: 0221000164 |
|---|---|
| DIST-CO-RTE-PM | 02-SIS-I5-2.5/R15.9 |
| Award Date | 04/28/2023 |
| Closeout Date | Not set |
| Work Description | Roadway rehabilitation and bridge improvements along I5 in Mount Shasta |
| Location Description | SIS I5 2.5/R15.9 |
| QA Service Level | 1 (Verified on 05/03/2023) |
Sample Information
| Sample Taken Date | 11/02/2023 | Sample Unique Key | 40 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/02/2023 |
| Sample type | Department Acceptance | A brief description of the sample | 2 bags of 3/4-inch Maximum Class 2 Aggregate Base |
| The quantity of what the sample constitutes | Up to 2000 cy/3000 tons | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Danny | Last name of sampler or witnessed by | Hansen |
| Title of sampler | Consultant | Telephone number of sampler | |
| Laboratory sample identification | D79375 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Tullis Inc. - Northstate Asphalt (Redding CA) | Transportation Laboratory (TL) Number | 851262 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 00-00-0000 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Stockpile | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-11-02-40
DIME Test ID: 2023-11-02-40-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2023-11-17
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: Yes
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Josh Murphy
Date of test: 11/16/2023
| Sieve Size | Cumulative Mass Retained | Cumulative Percent Passing | ||||
|---|---|---|---|---|---|---|
| 15288.4 grams | ||||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 527.0 grams | 97 % | |||||
| 3133.0 grams | 80 % | |||||
| 4527.0 grams | 70 % | |||||
| 6877.0 grams | 55 % | |||||
| 464.6 grams | ||||||
| 94.1 grams | 44 % | |||||
| 170.8 grams | 35 % | |||||
| 231.6 grams | 28 % | |||||
| 291.1 grams | 21 % | |||||
| 349.0 grams | 14 % | |||||
| 386.5 grams | 9 % | |||||
General comments (publicly viewable) (Max 1000 characters): P1″=100.%,
P¾″=97%,
P№4=55%,
P№30=28%,
P№200=9%
Test was verified on 11/17/2023 ✔