DIME - Test Summary

Summary for Test 2023-07-10-71-3

Test performed: CTM 212-May 2010

Project Identifiers	Project ID: 993339 DEA: 024H9304 EFIS: 0219000027
DIST-CO-RTE-PM	02-SHA-299-44.3/44.9
Award Date	07/13/2022
Closeout Date	04/11/2024
Work Description	INGOT CURVE IMPROVEMENT - CURVE IMROVEMENT
Location Description	IN SHASTA COUNTY NEAR INGOT FROM 2.7 MILES EAST OF SEAMANS GULCH ROAD TO 1.2 MILES WEST OF DU BOIS ROAD.
QA Service Level	1 (Verified on 11/22/2021)

Sample Taken Date	07/10/2023	Sample Unique Key	71
Date that the sample was received by the laboratory/organization performing the testing	07/10/2023	Sample type	Department Acceptance
A brief description of the sample	3 bags of Shoulder Backing	The quantity of what the sample constitutes	Entire Project
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	Cindy
Last name of sampler or witnessed by	Bryant	Title of sampler	TET
Telephone number of sampler		Laboratory sample identification	D79289
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Bear Gulch Quarry
Transportation Laboratory (TL) Number	858122	Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-45-0023
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Stockpile
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2023-07-10-71

DIME Test ID: 2023-07-10-71-3

Testing Lab: CT D02 - Redding Northern Regional Laboratory

Test Method: CTM 212-May 2010: Method of Test for Unit Weight of Aggregate

Test Release Date: 2023-11-06

Input Type: Measured

Tester's full name: Dennis Hickey

Date of test: 07/19/2023

Which procedure was used to fill the measure with aggregate?: no data

Weight of water in the measure: 21.053 lbm

Water temperature: 73 deg F

Tare weight of empty measure: 12.973 lbm

Weight of measure filled with aggregate (test 1): 48.267 lbm

Weight of measure filled with aggregate (test 2): 47.495 lbm

Weight of measure filled with aggregate (test 3): 48.167 lbm

Water density: 62.28 lbf/ft^3

Factor F: 2.96 ft^-3

Net weight of aggregate in measure (test 1): 35.29 lbm

Net weight of aggregate in measure (test 2): 34.52 lbm

Net weight of aggregate in measure (test 3): 35.19 lbm

Average net weight of aggregate required to fill the measure: 35 lbm

Aggregate unit weight: 103.54 lbf/ft^3

General comments (publicly viewable) (Max 1000 characters): UW≈104pcf

Test was verified on 11/6/2023 ✔