DIME - Test Summary

Summary for Test 2023-09-20-90-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 994191 DEA: 081G8304 EFIS: 0816000079
DIST-CO-RTE-PM	08-SBD-40-R100.8/R101.8
Award Date	02/07/2023
Closeout Date	08/29/2025
Work Description	HMA, STRUCTURAL CONC, BAR REINFORCING STEEL, CRSP & IMPORTED BORROW.
Location Description	SAN BERNARDINO COUNTY AT ESSEX FROM 1.1 MILES EAST OF ESSEX ROAD OVERCROSSING TO 0.5 MILE EAST OF HALFWAY HILLS WASH BRIDGE
QA Service Level	1 (Verified on 03/30/2023)

Sample Taken Date	09/20/2023	Sample Unique Key	90
Date that the sample was received by the laboratory/organization performing the testing	10/19/2023	Sample type	Verification
A brief description of the sample	PSUE 1" HMA-A-SP R25 1% LSM	The quantity of what the sample constitutes	12 Bags each Of Virgin & L.T. Agg., 2 Bags Rap
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	Blue Diamond
Last name of sampler or witnessed by	QC	Title of sampler
Telephone number of sampler		Laboratory sample identification	0487A-23
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Blue Diamond-Victorville
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-36-0046
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut at Blue Diamond Victorville Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	1 inch
The concrete mix design number	300222-CPC R25	Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2023-09-20-90

DIME Test ID: 2023-09-20-90-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2023-12-13

Input Type: Measured

Tester's full name: Friday Ofoegbu

Date of test: 10/21/2023

Mass of saturated surface dry sample (before pycnometer) (S)	500.0 grams
Mass of the pycnometer with water and aggregate (C)	973.4 grams
Mass of the pycnometer with water (B)	663.7 grams
Mass of the oven dried sample (before pycnometer) (A)	493.4 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.0 grams
Mass of the oven dry aggregate (for absorption) (A)	493.4 grams
Test Sample Preparation	6% Moisture
Bulk specific gravity	2.593
Bulk specific gravity (SSD Basis)	2.627
Apparent specific gravity	2.686
Absorption	1.3 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 12/13/2023 ✔