Summary for Test 2023-10-31-13-16
Test performed: ASME B1.2-83r17Project Information
| Project Identifiers | Project ID: 993788 DEA: 033F0724 EFIS: 0322000010 |
|---|---|
| DIST-CO-RTE-PM | 03-SAC-51-2.5/3.3 |
| Award Date | 04/22/2022 |
| Closeout Date | 08/09/2024 |
| Work Description | Procure steel girders |
| Location Description | District-County-Route-Post Mile: 03-Sac-51-2.5/3.3 |
| QA Service Level | 1 (Verified on 04/25/2022) |
Sample Information
| Sample Taken Date | 10/31/2023 | Sample Unique Key | 13 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 11/01/2023 | Sample type | Verification |
| A brief description of the sample | 7/8" x 3" and 7/8" x 3 1/4" bolt, nut, washer assembly | The quantity of what the sample constitutes | 2 bags w/3 assy. in each |
| From where was the sample collected | Fabricator | First name of sampler or witnessed by | David |
| Last name of sampler or witnessed by | Sebastian | Title of sampler | QAI |
| Telephone number of sampler | 760-908-7939 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Vigor Works | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | B398-072-23 | |
| Structure unique identifier | 24-0003 | Structure name | American River Bridge |
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | 130000 |
|---|---|---|---|
| Heat Number(s) | 1000220883 10815890 223828 226005 | Nut Mfg. Lot Number(s) | 37887-S-223828 |
| Washer Mfg. Lot Number(s) | 30659 226005 | Bolt Specification | ASTM A325 |
| Bolt Length(s) | 3.00 3.250 | Nut Specification | ASTM A563 DH |
| Washer Specification | ASTM F436 1 | Finish | HOT DIP ASTM F2329 |
| Diameter/Size | 7/8" | Bolt Mfg. Lot Number | BG2647 E674J1 |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | ||
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-10-31-13
DIME Test ID: 2023-10-31-13-16
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Test Release Date: 2023-11-02
Test Results
Input Type: Calculated
Tester's full name: Andrew Auvinen
Date of test: 11/02/2023
Sample No.: 1B
Rocap Number: no data
Heat Number(s): no data
Mfg. Lot Number: 37887-S-223828
Finish Coating: ASTM F2329 - Hot Dip
Product Markings: U DH
Size: 0.875 in
Gage Type: Pass
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 11/2/2023 ✔