Summary for Test 2023-07-07-73-1
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 994388 DEA: 023J8004 EFIS: 0222000085 |
|---|---|
| DIST-CO-RTE-PM | 02-TRI-3-11.0/R26.3,38.0/42.0 |
| Award Date | 12/21/2022 |
| Closeout Date | 10/06/2023 |
| Work Description | PLACE AR CHIP SEAL WITH REPLACE ASPHALT CONCRETE SURFACING. |
| Location Description | TRINITY COUNTY NEAR HAYFORK FROM 0.7 MILE SOUTH OF WILDWOOD ROAD TO BROWNS CREEK BRIDGE NO. 05-0037 AND NEAR WEAVERVILLE FROM 0.1 MILE NORTH OF RUSH CREEK ROAD TO 0.5 MILE SOUTH OF TANNERY GULCH ROAD |
| QA Service Level | 1 (Verified on 03/28/2023) |
Sample Information
| Sample Taken Date | 07/07/2023 | Sample Unique Key | 73 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 07/07/2023 | Sample type | Department Acceptance |
| A brief description of the sample | 1 bag of Sand Cover | The quantity of what the sample constitutes | Whole Project |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Sean |
| Last name of sampler or witnessed by | McWithey | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | D79286B | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Tullis – Crystal Creek Aggregates (Redding, CA) | |
| Transportation Laboratory (TL) Number | 898194 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-45-0021 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Stockpile | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | fine | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-07-07-73
DIME Test ID: 2023-07-07-73-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2023-10-31
Test Results
What size aggregate is being tested?: Fine Aggregate
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Josh Ferency
Date of test: 07/11/2023
| Sieve Size | Cumulative Mass Retained | Cumulative Percent Passing | ||||
|---|---|---|---|---|---|---|
| 500 grams | ||||||
| 0.0 grams | 100 % | |||||
| 0.7 grams | 100 % | |||||
| 90.1 grams | 82 % | |||||
| 217.2 grams | 57 % | |||||
| 327.6 grams | 34 % | |||||
| 410.4 grams | 18 % | |||||
| 454.4 grams | 9 % | |||||
| 468.4 grams | 6 % | |||||
| 469.0 grams | ||||||
General comments (publicly viewable) (Max 1000 characters): P⅜″=100.%,
P№4=100.%,
P№8=82%,
P№16=57%,
P№30=34%,
P№50=18%,
P№100=9%,
P№200=6%,
№16x30=22%,
№30x50=17%
Test was verified on 10/31/2023 ✔