Summary for Test 2017-03-27-2-1
Test performed: CONCLP 3-16Project Information
| Project Identifiers | Project ID: 211504 DEA: 060N9904 EFIS: 0612000114 |
|---|---|
| DIST-CO-RTE-PM | 06-FRE,MAD-41U-33.1/33.4,0.0/0.3 |
| Award Date | 10/13/2016 |
| Closeout Date | 10/02/2019 |
| Work Description | BRIDGE SCOUR MITIGATION, SEISMIC RETROFIT AND UPGRADE RAIL. |
| Location Description | FRESNO AND MADERA COUNTIES NEAR FRESNO FROM 0.1 MILE NORTH OF PERRIN ROAD UNDERCROSSING TO 0.1 MILE SOUTH OF AVENUE 9 UNDERCROSSING |
| QA Service Level | 1 (Verified on 10/05/2016) |
Sample Information
| Sample Taken Date | 03/27/2017 | Sample Unique Key | 2 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/27/2017 |
| Sample type | Quality Control | A brief description of the sample | polyester resin |
| The quantity of what the sample constitutes | 80 drums | From where was the sample collected | Source |
| First name of sampler or witnessed by | Unknown | Last name of sampler or witnessed by | Nunes |
| Title of sampler | Unknown | Telephone number of sampler | Unknown |
| Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | kwik Bond, Benecia | Transportation Laboratory (TL) Number | c594923 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | 1039800 |
|---|---|---|---|
| Batch number | 1039800 | Mix number | 3232 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2017-03-27-2
DIME Test ID: 2017-03-27-2-1
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: CONCLP 3-16: Polyester Resin
Test Release Date: 2017-05-25
Test Results
Input Type: Calculated
Tester's full name: Mike Mullins
Date of test: 03/30/2017
Viscosity ASTM D 2196, RVT, No. 1 spindle 75 to 200 cps @ 20 RPM, 77°F: 104 cps
Specific gravity ASTM D 1475 1.05 to 1.10 @ 77°F: 1.08
Conditioning (18/25/50 + 5/70) Elogation ASTM D 638, minimum 35%: 61 %
Tensile Strength ASTM D 638 Type 1 @ 0.45 in/min, minimum 2500 psi: 2733 psi
Styrene ASTM D 2369 40% to 50 %: 38.3 %
PCC - SSD bond strength CTM 551 500 psi minimun @ 24 hours: 606 psi
Static Volatile Emissions, SCAQMD 309-91, maximum loss 1.0 grams: 0.14 grams
General comments (publicly viewable) (Max 1000 characters): accepted on QC results
Test was verified on 5/25/2017 ✔