DIME - Test Summary

Summary for Test 2023-10-03-48-6

Test performed: AASHTO T304-11

Project Identifiers	Project ID: 994638 DEA: 023J8404 EFIS: 0222000089
DIST-CO-RTE-PM	02-SIS-96-28.0/34.5
Award Date	05/25/2023
Closeout Date	04/11/2024
Work Description	HMA OVERLAY WITH REPLACE ASPHALT CONCRETE SURFACING.
Location Description	SISKIYOU COUNTY NEAR HAPPY CAMP FROM 4.6 MILES WEST OF CLEAR CREEK BRIDGE TO 0.2 MILE EAST OF OAK FLAT CREEK BRIDGE
QA Service Level	1 (Verified on 08/07/2023)

Sample Taken Date	10/03/2023	Sample Unique Key	48
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	10/03/2023
Sample type	Production Start-Up	A brief description of the sample	3/4-inch Type A Untreated Virgin Aggregate
The quantity of what the sample constitutes	Production Start Up Evaluation	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Joe	Last name of sampler or witnessed by	Delgado
Title of sampler	Consultant	Telephone number of sampler
Laboratory sample identification	D79365F	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Fawndale Rock Quarry / J.F. Shea	Transportation Laboratory (TL) Number	824483
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-45-0017
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Combined in Laboratory from Untreated Sized Virgin Aggregate Stockpiles
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2023-10-03-48

DIME Test ID: 2023-10-03-48-6

Testing Lab: CT D02 - Redding Northern Regional Laboratory

Test Method: AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)

Test Release Date: 2023-10-26

What test method is performed?: Method A

Input Type: Measured

Tester's full name: Dennis Hickey

Date of test: 10/13/2023

Mass of measure: 190.2 grams

Bulk dry specific gravity: 2.709

Mass of sample and measure #1: 323.8 grams

Mass of sample and measure #2: 323.6 grams

Volume of cylinder: 100.2 mL

Mass of sample #1: 133.6 grams

Mass of sample #2: 133.4 grams

Uncompacted voids #1: 50.8 %

Uncompacted voids #2: 50.9 %

Average uncompacted voids: 50.8 %

General comments (publicly viewable) (Max 1000 characters): Us=50.8

Test was verified on 10/26/2023 ✔