DIME - Test Summary

Summary for Test 2023-10-02-33-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 994883 DEA: 081K0404 EFIS: 0818000187 Permit Numbers: 0822NOP2301
DIST-CO-RTE-PM	08-SBD-SR-210-15.7/16.2
Award Date	05/09/2023
Closeout Date	Not set
Work Description	Interchange Improvements - various additional lanes, roadway widening, SW, C&G, RW, MBGR, striping, pavement markings, signals, and lighting.
Location Description	SR210/Alder Avenue Interchange in Rialto, CA.
QA Service Level	NOT VERIFIED

Sample Taken Date	10/02/2023	Sample Unique Key	33
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	10/03/2023
Sample type	Verification	A brief description of the sample	JMF 1/2" HMA-A-SP R15
The quantity of what the sample constitutes	4 Bags Of Agg., 2 Bags Rap	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Corona Plant	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	All American Asphalt- Corona	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0005
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut at All American Corona Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	104375	Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2023-10-02-33

DIME Test ID: 2023-10-02-33-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2023-12-05

Input Type: Measured

Tester's full name: Friday Ofoegbu

Date of test: 10/05/2023

Mass of saturated surface dry sample (before pycnometer) (S): 500 grams

Mass of the pycnometer with water and aggregate (C): 990 grams

Mass of the pycnometer with water (B): 674.6 grams

Mass of the oven dried sample (before pycnometer) (A): 494 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams

Mass of the oven dry aggregate (for absorption) (A): 494 grams

Test Sample Preparation: 6% Moisture

Bulk specific gravity: 2.676

Bulk specific gravity (SSD Basis): 2.709

Apparent specific gravity: 2.766

Absorption: 1.2 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 12/5/2023 ✔