Summary for Test 2023-07-14-31-3
Test performed: ASTM D638-Dec14Project Information
Project Identifiers | Project ID: 994613 DEA: 112N1444 EFIS: 1122000009 |
---|---|
DIST-CO-RTE-PM | 11-SD-52,125,805-VAR |
Award Date | 05/30/2023 |
Closeout Date | Not set |
Work Description | POLYESTER CONCRETE OVERLAY, METHACRYLATE, & JOINT SEALS. |
Location Description | SAN DIEGO COUNTY AT VARIOUS LOCATIONS |
QA Service Level | 1 (Verified on 07/18/2023) |
Sample Information
Sample Taken Date | 07/14/2023 | Sample Unique Key | 31 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/17/2023 |
Sample type | Quality Control | A brief description of the sample | 1 gallon can |
The quantity of what the sample constitutes | 2 tankers | From where was the sample collected | Source |
First name of sampler or witnessed by | Gilberto | Last name of sampler or witnessed by | Gonzalez |
Title of sampler | Quality Control Manager | Telephone number of sampler | 17076245467 |
Laboratory sample identification | 943815 | Linked DIME Sample ID | 943815 |
The fabricator/manufacturer/facility name | Kwik Bond Polymers, Benicia | Transportation Laboratory (TL) Number | Sacramento Caltrans lab |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Polyester | Mfg. Lot Number(s) | 1480880 |
---|---|---|---|
Batch number | 1480880 | Mix number | 1480880 |
Test Details
DIME Sample ID: 2023-07-14-31
DIME Test ID: 2023-07-14-31-3
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Test Release Date: 2023-10-18
Test Results
Number of specimens tested: 6
Input Type: Measured
Tester's full name: Linda Bergstrom
Date of test: 07/20/2023
Conditioning procedure: 18/25/50+5/70
Speed of testing: 0.45 in/min
Sample 1 Width: 0.486 in
Sample 1 Thickness: 0.267 in
Sample 1 Area: 0.1298 in^2
Sample 1 Ultimate Strength Actual: 441.2 lbs
Sample 1 percent elongation: 64.9 %
Sample 1 Time: 0 MM:SS
Sample 2 Width: 0.486 in
Sample 2 Thickness: 0.262 in
Sample 2 Area: 0.1273 in^2
Sample 2 Ultimate Strength Actual: 436.4 lbs
Sample 2 percent elongation: 63 %
Sample 2 Time: 0 MM:SS
Sample 3 Width: 0.487 in
Sample 3 Thickness: 0.255 in
Sample 3 Area: 0.1242 in^2
Sample 3 Ultimate Strength Actual: 428.5 lbs
Sample 3 percent elongation: 64.2 %
Sample 3 Time: 0 MM:SS
Sample 4 Width: 0.487 in
Sample 4 Thickness: 0.253 in
Sample 4 Area: 0.1232 in^2
Sample 4 Ultimate Strength Actual: 424.7 lbs
Sample 4 percent elongation: 62.5 %
Sample 4 Time: 0 MM:SS
Sample 5 Width: 0.488 in
Sample 5 Thickness: 0.255 in
Sample 5 Area: 0.1244 in^2
Sample 5 Ultimate Strength Actual: 439.9 lbs
Sample 5 percent elongation: 66.5 %
Sample 5 Time: 0 MM:SS
Sample 6 Width: 0.486 in
Sample 6 Thickness: 0.259 in
Sample 6 Area: 0.1259 in^2
Sample 6 Ultimate Strength Actual: 437.8 lbs
Sample 6 percent elongation: 64.8 %
Sample 6 Time: 0 MM:SS
Sample 1 Ultimate strength: 3399.1 psi
Sample 2 Ultimate strength : 3428.1 psi
Sample 3 Ultimate strength: 3450.1 psi
Sample 4 Ultimate strength: 3447.2 psi
Sample 5 Ultimate strength: 3536.2 psi
Sample 6 Ultimate strength : 3477.4 psi
Ultimate Strength Average: 3456 psi
Percent Elongation Average: 64 %
General comments (publicly viewable) (Max 1000 characters): Accepted vendor's results.
Test was verified on 10/18/2023 ✔