Summary for Test 2023-10-07-12-2
Test performed: ASTM F606-21Project Information
| Project Identifiers | Project ID: 215620 DEA: 01436404 EFIS: 0100000193 |
|---|---|
| DIST-CO-RTE-PM | 01-DN-101-35.8/36.5 |
| Award Date | 07/11/2022 |
| Closeout Date | Not set |
| Work Description | Dr. Fine Bridge Replacement |
| Location Description | DR. FINE BRIDGE REPLACEMENT FROM LAKE EARL DR TO S FRED D. HAIGHT DR ON HWY 101 ACROSS SMITH RIVER. |
| QA Service Level | 1 (Verified on 03/26/2021) |
Sample Information
| Sample Taken Date | 10/07/2023 | Sample Unique Key | 12 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 10/13/2023 | Sample type | Verification |
| A brief description of the sample | SCO215 Guardrail Bolt | The quantity of what the sample constitutes | 360 |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | Paul |
| Last name of sampler or witnessed by | Farinha | Title of sampler | ASI |
| Telephone number of sampler | 9167987102 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Acrow | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | NA | Nut Mfg. Lot Number(s) | NA |
| Washer Mfg. Lot Number(s) | NA | Bolt Specification | A449 |
| Bolt Length(s) | 7.5" | Nut Specification | ASTM A563 |
| Washer Specification | ASTM F436 | Finish | HDG |
| Diameter/Size | 7/8 | Bolt Mfg. Lot Number | NA |
| Rocap Test Requirement(s) | no | Lubricant Requirements(s) | yes |
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-10-07-12
DIME Test ID: 2023-10-07-12-2
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)
Test Release Date: 2023-10-20
Test Results
Number of Samples: 1
Input Type: Measured
Tester's full name: aauvinen
Date of test: 10/17/2023
UTM: 400kip
Temperature: 72
| Num | Sample | Size | Area (in^2) | Peak Load (lbf) | Peak Load (kN) | Tensile Strength (psi) | Stress at Offset (psi) | Load at Offset (lbf) | Comments |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 1B | UNC 7/8 | 0.462 | 74146 | 329 | 160490 | 157740 | 72876 | Head Ripped Off |
General comments (publicly viewable) (Max 1000 characters): Head Ripped Off
Test Graph
Source: Bluehill Data Point FileTest was verified on 10/20/2023 ✔