Summary for Test 2023-09-18-82-2
Test performed: CTM 217-June 2011Project Information
Project Identifiers | Project ID: 215336 DEA: 051G9804 EFIS: 0516000009 |
---|---|
DIST-CO-RTE-PM | 05-SLO-1-10.0/16.8 |
Award Date | 12/19/2022 |
Closeout Date | Not set |
Work Description | RHMA (GAP GRADED), RETAINING WALL, CURB RAMPS AND LIGHTING SYSTEMS. |
Location Description | SAN LUIS OBISPO COUNTY FROM GRACIA WAY AT OCEANO TO ROUTE 1/101 SEPARATION IN PISMO BEACH. |
QA Service Level | 1 (Verified on 11/18/2020) |
Sample Information
Sample Taken Date | 09/18/2023 | Sample Unique Key | 82 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/18/2023 |
Sample type | Department Acceptance | A brief description of the sample | 3/4" coldfeed |
The quantity of what the sample constitutes | PSUE | From where was the sample collected | Supplier |
First name of sampler or witnessed by | Isaac | Last name of sampler or witnessed by | Gleffe |
Title of sampler | ARET | Telephone number of sampler | 18053191237 |
Laboratory sample identification | 230918A | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Calportland-Garey | Transportation Laboratory (TL) Number | C230917A |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Lot 1 | Structure unique identifier | |
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-42-0014 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | 3/4 inch Coldfeed | The fabricator/manufacturer designation for the sample | PSUE |
The plant number | Calportland Garey | A detailed description of where the material sample was collected | Belt Discharge |
Where the material sample would have been placed if not sampled | HWY 1 Pismo Beach | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | Lot number | 1 | |
Sublot number | 1 | Aggregate Mix Number | D1215H530 |
Test Details
DIME Sample ID: 2023-09-18-82
DIME Test ID: 2023-09-18-82-2
Testing Lab: CT D05 - Santa Maria Field Laboratory
Test Method: CTM 217-June 2011: Method of Test for Sand Equivalent
Test Release Date: 2023-10-06
Test Results
Number of tests: 3
Input Type: Measured
Tester's full name: Salvador Lopez-Zamora
Date of test: 09/18/2023
Temperature correction: 0
Temperature of solution: 77
Clay reading (test 1): 5.8
Sand reading (test 1): 3.1
Clay reading (test 2): 5.7
Sand reading (test 2): 2.9
Clay reading (test 3): 5.9
Sand reading (test 3): 3.1
Sand equivalent (test 1): 54
Sand equivalent (test 2): 51
Sand equivalent (test 3): 53
Sand equivalent before temperature correction: 53
Sand equivalent after temperature correction: 53
General comments (publicly viewable) (Max 1000 characters): SE for L1 SL1 3/4-inch HMA-A
Test File Attachments
File Name | Extension | File Size | Date Uploaded | Test ID | Actions |
---|---|---|---|---|---|
05-1G9804_37000_.75 HMA Gradation_230918_L1SL01 | 111.01 KB | 10/06/2023 | 2023-09-18-82-2 | Info |
Test was verified on 10/6/2023 ✔