Summary for Test 2023-09-18-75-2
Test performed: ASTM D412-16r21Project Information
| Project Identifiers | Project ID: 995143 DEA: 120T1104 EFIS: 1222000003 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-55-0.1/15.3 |
| Award Date | 02/28/2023 |
| Closeout Date | 06/18/2024 |
| Work Description | Treat bridge deck, Paint girder, Replace joint seal and bearing pad |
| Location Description | Orange County at Various Locations on State Routes 1, 55, and 241 |
| QA Service Level | 1 (Verified on 09/11/2023) |
Sample Information
| Sample Taken Date | 09/18/2023 | Sample Unique Key | 75 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 09/27/2023 | Sample type | Quality Assurance |
| A brief description of the sample | Bearing Pad | The quantity of what the sample constitutes | 5 |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Krishnamoorthy |
| Last name of sampler or witnessed by | Palaniappan | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Bridge Rubber Bearing | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM1 - Elastomeric Bearing Pad | Mfg. Lot Number(s) | 2527-10 |
|---|---|---|---|
| Material/Compound/Elastomer ID | NA | Samples Representing | 5 |
| Description (size) | 6.33" x 22" x 26" | Comments | |
| Description (Number of Shims) | 11 | Type of Bearing Pad | Steel |
| Description (Thickness of Shims) | 14 gage | Manufacturer(s) | Bridge Rubber Bearing |
| Batch Number | 135189 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-09-18-75
DIME Test ID: 2023-09-18-75-2
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM D412-16r21: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Test Release Date: 2023-10-09
Test Results
Number of specimens tested: 3
Unit of the Ultimate Tensile Values: lbf per sqr in
Input Type: Calculated
Tester's full name: aauvinen
Date of test: 10/03/2023
UTM: 2kip
Humidity: 50.00 %
Temperature: 72 F
Sample 1 Median Thickness: 0.094
Sample 1 Thickness all Within 0.003 inch?: Yes
Sample 1 Ultimate Tensile: 2279.74 lbf/in^2
Sample 1 Elongation (350% Min): Pass
Sample 2 Median Thickness: 0.092
Sample 2 Thickness all Within 0.003 inch?: Yes
Sample 2 Ultimate Tensile: 2342.51 lbf/in^2
Sample 2 Elongation (350% Min): Pass
Sample 3 Median Thickness: 0.092
Sample 3 Thickness all Within 0.003 inch?: Yes
Sample 3 Ultimate Tensile: 2313.1 lbf/in^2
Sample 3 Elongation (350% Min): Pass
Median of the Ultimate Tensile Values: 2313.1 lbf/in^2
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Bluehill Data Point FileTest graph for Sample 1
Source: Bluehill Data Point File
Test graph for Sample 3
Source: Bluehill Data Point File
Test graph for Sample 2
Test was verified on 10/9/2023 ✔