DIME - Test Summary

Summary for Test 2023-09-05-41-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 994599 DEA: 081N1604 EFIS: 0822000106
DIST-CO-RTE-PM	08-SBD-40-R20.0/R28.1
Award Date	05/24/2023
Closeout Date	08/30/2024
Work Description	RHMA, HIGH DENSITY POLYURETHANE INJECTION, AND COLD PLANE AC PVMT.
Location Description	SAN BERNARDINO COUNTY NEAR BARSTOW FROM 0.3 MILE WEST OF NEWBERRY ROAD OVERCROSSING TO DESERT OASIS REST AREA
QA Service Level	1 (Verified on 08/14/2023)

Sample Taken Date	09/05/2023	Sample Unique Key	41
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	09/11/2023
Sample type	Verification	A brief description of the sample	JMF 3/4" RHMA-G-SP, 1.0% LSM
The quantity of what the sample constitutes	11 Bags Of Bin Agg., 3 Bags Comb. Agg., 1 Bag each Of Scrap &Hi-Nat	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Alex	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0467G-23	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Blue Diamond-Victorville	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-36-0046, 91-36-0022
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut at Blue Diamond Victorville Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	300072-LSM	Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2023-09-05-41

DIME Test ID: 2023-09-05-41-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2023-11-01

Input Type: Measured

Tester's full name: Friday Ofoegbu

Date of test: 09/13/2023

Mass of saturated surface dry sample (before pycnometer) (S): 500.0 grams

Mass of the pycnometer with water and aggregate (C): 965.5 grams

Mass of the pycnometer with water (B): 660.4 grams

Mass of the oven dried sample (before pycnometer) (A): 493.0 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500.0 grams

Mass of the oven dry aggregate (for absorption) (A): 493.0 grams

Test Sample Preparation: 6% Moisture

Bulk specific gravity: 2.530

Bulk specific gravity (SSD Basis): 2.565

Apparent specific gravity: 2.624

Absorption: 1.4 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 11/1/2023 ✔