Summary for Test 2023-09-18-62-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 994617 DEA: 112N1664 EFIS: 1122000153 |
---|---|
DIST-CO-RTE-PM | 11-SD-79-44.7/53.0 |
Award Date | 05/18/2023 |
Closeout Date | 06/11/2024 |
Work Description | COLD PLANE, RHMA OVERLAY, PAVEMENT MARKING, & RUMBLE STRIP. |
Location Description | SAN DIEGO COUNTY NEAR SUNSHINE SUMMIT FROM 1.2 MILES NORTH OF ACORN CREEK BRIDGE TO RIVERSIDE COUNTY LINE |
QA Service Level | 1 (Verified on 11/30/2023) |
Sample Information
Sample Taken Date | 09/18/2023 | Sample Unique Key | 62 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/19/2023 |
Sample type | Quality Assurance | A brief description of the sample | 3/4" HMA PSU |
The quantity of what the sample constitutes | 12 boxes 3 bags | From where was the sample collected | Source |
First name of sampler or witnessed by | N/A | Last name of sampler or witnessed by | N/A |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 9601-PSU | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Martin Marietta | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | N/A |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-09-18-62
DIME Test ID: 2023-09-18-62-1
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2023-10-03
Test Results
What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Measured
Tester's full name: Daniel Smith
Date of test: 09/29/2023
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
8187 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
510.0 grams | 94 % | |||||
3019.0 grams | 63 % | |||||
3983.0 grams | 51 % | |||||
5057.0 grams | 38 % | |||||
512.3 grams | ||||||
154.8 grams | 27 % | |||||
292.6 grams | 16 % | |||||
365.7 grams | 11 % | |||||
414.2 grams | 7 % | |||||
442.0 grams | 5 % | |||||
461.2 grams | 3.8 % | |||||
464.5 grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/3/2023 ✔