Summary for Test 2023-08-23-72-4
Test performed: CTM 521-June 2012Project Information
| Project Identifiers | Project ID: 215445 DEA: 100X7504 EFIS: 1013000009 |
|---|---|
| DIST-CO-RTE-PM | 10-ALP-4,88,89-var |
| Award Date | 03/18/2021 |
| Closeout Date | 04/22/2025 |
| Work Description | REPLACE BRIDGE RAIL, BARRIER SLAB AND GUARDRAIL. |
| Location Description | ALPINE COUNTY AT VARIOUS LOCATIONS |
| QA Service Level | 1 (Verified on 02/01/2021) |
Sample Information
| Sample Taken Date | 08/23/2023 | Sample Unique Key | 72 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/24/2023 |
| Sample type | Quality Assurance | A brief description of the sample | Fiber Deck Mix |
| The quantity of what the sample constitutes | (3) 4x8 Test Cylinders | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Ramneet | Last name of sampler or witnessed by | Sidhu |
| Title of sampler | FIELD INSPECTOR | Telephone number of sampler | 5308124294 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Not Provided | Transportation Laboratory (TL) Number | TL502 79399 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | 31-0022 | |
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Concrete | The concrete mix design number | D673A |
|---|---|---|---|
| The truck number from where the sample was collected | The batch plant ticket number from where the sample was collected | Not Provided | |
| Concrete batch plant | The fabricator/manufacturer designation for the sample | ||
| A detailed description of where the material sample was collected | Transit Truck Chute | Where the material sample would have been placed if not sampled | |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-08-23-72
DIME Test ID: 2023-08-23-72-4
Testing Lab: CT D10 - Stockton Field Laboratory
Test Method: CTM 521-June 2012: Method of Test for Compressive Strength of Molded Concrete Cylinders
Test Release Date: 2023-09-20
Test Results
Number of specimens: 3
Input Type: Measured
Tester's full name: Tim Trefz
Date of test: 09/20/2023
Cylinder Diameter, Cylinder 1 (measurement 1): 4 in
Cylinder Diameter, Cylinder 1 (measurement 2): 4 in
Cylinder Diameter, Cylinder 2 (measurement 1): 4 in
Cylinder Diameter, Cylinder 2 (measurement 2): 4 in
Cylinder Diameter, Cylinder 3 (measurement 1): 4 in
Cylinder Diameter, Cylinder 3 (measurement 2): 4 in
Maximum Load, Cylinder 1: 71260 lb
Maximum Load, Cylinder 2: 67800 lb
Maximum Load, Cylinder 3: 71350 lb
Correction factor: 1
Cylinder Age: 28 days
Break Description of Cylinder 1 (if not 'cone'): Type B
Break Description of Cylinder 2 (if not 'cone'): Type B
Break Description of Cylinder 3 (if not 'cone'): Type C
Average Diameter, Cylinder 1: 4 in
Average Diameter, Cylinder 2: 4 in
Average Diameter, Cylinder 3: 4 in
Cross-Sectional Area of Cylinder 1: 12.57 in^2
Cross-Sectional Area of Cylinder 2: 12.57 in^2
Cross-Sectional Area of Cylinder 3: 12.57 in^2
Average Compressive Strength (to nearest 10): 5580 lb/in^2
Compressive Strength of Cylinder 1: 5669.05 lb/in^2
Compressive Strength of Cylinder 2: 5393.79 lb/in^2
Compressive Strength of Cylinder 3: 5676.21 lb/in^2
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/20/2023 ✔