DIME - Test Summary

Summary for Test 2023-08-14-85-6

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 994613 DEA: 112N1444 EFIS: 1122000009
DIST-CO-RTE-PM	11-SD-52,125,805-VAR
Award Date	05/30/2023
Closeout Date	08/01/2024
Work Description	POLYESTER CONCRETE OVERLAY, METHACRYLATE, & JOINT SEALS.
Location Description	SAN DIEGO COUNTY AT VARIOUS LOCATIONS
QA Service Level	1 (Verified on 07/18/2023)

Sample Taken Date	08/14/2023	Sample Unique Key	85
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	08/15/2023
Sample type	Quality Assurance	A brief description of the sample	1/2" HMA
The quantity of what the sample constitutes	12 boxes 3 bags	From where was the sample collected	Source
First name of sampler or witnessed by	Jesse	Last name of sampler or witnessed by	Fuentes
Title of sampler		Telephone number of sampler
Laboratory sample identification	9201-PSU	Linked DIME Sample ID	2023-08-14-84
The fabricator/manufacturer/facility name	CCA Lakeside	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	N/A
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Plant
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2023-08-14-85

DIME Test ID: 2023-08-14-85-6

Testing Lab: CT D11 - District 11 Materials Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2023-10-10

Input Type: Measured

Tester's full name: Daniel Smith

Date of test: 09/19/2023

Mass of saturated surface dry sample (before pycnometer) (S): 500.0 grams

Mass of the pycnometer with water and aggregate (C): 987.9 grams

Mass of the pycnometer with water (B): 680.8 grams

Mass of the oven dried sample (before pycnometer) (A): 489.3 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500.0 grams

Mass of the oven dry aggregate (for absorption) (A): 489.3 grams

Test Sample Preparation: 6% Moisture

Bulk specific gravity: 2.537

Bulk specific gravity (SSD Basis): 2.592

Apparent specific gravity: 2.686

Absorption: 2.2 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 10/10/2023 ✔