DIME - Test Summary

Summary for Test 2023-09-13-40-3

Test performed: AASHTO T27-14

Sample Taken Date	09/13/2023	Sample Unique Key	40
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	09/13/2023
Sample type	Production Start-Up	A brief description of the sample	3 Bags lime treated 1/2-inch Agg
The quantity of what the sample constitutes	Production start-up evaluation	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Joe	Last name of sampler or witnessed by	Delgado
Title of sampler	Consultant	Telephone number of sampler
Laboratory sample identification	D79342A	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Tullis Inc. - Northstate Asphalt (Redding CA)	Transportation Laboratory (TL) Number	815623
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	Tullis - Northstate Asphalt
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut
Where the material sample would have been placed if not sampled	Road Way	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2023-09-13-40

DIME Test ID: 2023-09-13-40-3

Testing Lab: CT D02 - Redding Northern Regional Laboratory

Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)

Test Release Date: 2023-09-26

What type of gradation is being tested?: HMA Gradation

Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained

Does this test use 1/4 sieve? (question for HMA Gradation Type): No

Has the fine aggregate sample been reduced?: Yes

Input Type: Measured

Tester's full name: Colt Sweeny

Date of test: 09/18/2023

	Cumulative Mass Retained	Cumulative Percent Passing
Total mass of material in the sample	2385.2 grams
2 in. sieve	grams	%
1 1/2 in. sieve	0.0 grams	100 %
1 in. sieve	0.0 grams	100 %
3/4 in. sieve	0.0 grams	100 %
1/2 in. sieve	82.0 grams	97 %
3/8 in. sieve	377.0 grams	84 %
#4 sieve	1078.0 grams	55 %
Fine Sample Mass (reduced)	483.8 grams
#8 sieve	192.8 grams	33 %
#16 sieve	297.2 grams	21 %
#30 sieve	359.6 grams	14 %
#50 sieve	399.9 grams	10 %
#100 sieve	426.2 grams	7 %
#200 sieve	442.6 grams	4.7 %
Cumulative mass retained on the pan	444.3 grams

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 9/26/2023 ✔