Summary for Test 2023-08-11-54-1
Test performed: AASHTO T308-10Project Information
| Project Identifiers | Project ID: 995022 DEA: 09392104 EFIS: 0922000034 |
|---|---|
| DIST-CO-RTE-PM | 09--58-R107.7/R118.0 |
| Award Date | 04/12/2023 |
| Closeout Date | 11/01/2023 |
| Work Description | Place RHMA-G (Bonded Wearing Course) over existing pavement. |
| Location Description | IN KERN COUNTY ABOUT 17 MILES EAST OF TEHACHAPI FROM 0.1 MILE EAST OF CACHE CREEK BRIDGE TO 1.8 MILES EAST OF BUSINESS ROUTE 58 OVERCROSSING. |
| QA Service Level | 1 (Verified on 07/31/2023) |
Sample Information
| Sample Taken Date | 08/11/2023 | Sample Unique Key | 54 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 09/11/2023 | Sample type | Department Acceptance |
| A brief description of the sample | 1/2" RHMA-G-1% LSM | The quantity of what the sample constitutes | 4 BOXES OF HMA |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | STUWART |
| Last name of sampler or witnessed by | Ahumada | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | 0466G-23 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Griffith Edmonston-Lebec | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
|---|---|---|---|
| HMA Grading | 1/2 inch | Lot number | 1 |
| Sublot number | 14 | HMA Mix Number | GRF20G312RHMALSM |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-08-11-54
DIME Test ID: 2023-08-11-54-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2023-09-15
Test Results
What temperature unit is used?: Celsius
Input Type: Calculated
Tester's full name: Dylan Nault
Date of test: 09/12/2023
Test procedure used?: Method A
Mass of HMA Sample prior to ignition: 1612.2 g
Mass Loss: 125.1 g
Correction Factor (Percent by mass of HMA Specimen): 0.21 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.19 %
Test Temperature: 538 C
Corrected Asphalt Binder Content: 7.36 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/15/2023 ✔