Summary for Test 2017-02-06-3-1
Test performed: CONCLP 3-16Project Information
| Project Identifiers | Project ID: 211593 DEA: 034F0904 |
|---|---|
| DIST-CO-RTE-PM | 03-SAC-5,80-17.2,M8.9 |
| Award Date | 09/20/2016 |
| Closeout Date | 08/30/2018 |
| Work Description | REHABILITATE BRIDGE DECKS |
| Location Description | SACRAMENTO COUNTY IN SACRAMENTO ON ROUTE 5 AT FLORIN ROAD OVERCROSSING AND ON ROUTE 80 AT DEL PASO PARK OVERHEAD |
| QA Service Level | 1 (Verified on 10/20/2016) |
Sample Information
| Sample Taken Date | 02/06/2017 | Sample Unique Key | 3 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 02/08/2017 | Sample type | Quality Assurance |
| A brief description of the sample | polyester resin | The quantity of what the sample constitutes | 80000 |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Chris |
| Last name of sampler or witnessed by | nanes | Title of sampler | Unknown |
| Telephone number of sampler | Unknown | Laboratory sample identification | 17-010 |
| Linked DIME Sample ID | Unknown | The fabricator/manufacturer/facility name | reichhold azusa |
| Transportation Laboratory (TL) Number | c594916 | Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown |
| Structure unique identifier | Not set | Structure name | Not set |
| Bid Item | Not set |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | 1030651 |
|---|---|---|---|
| Batch Number | 1030651 | Mix number | 3224 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2017-02-06-3
DIME Test ID: 2017-02-06-3-1
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: CONCLP 3-16: Polyester Resin
Test Release Date: 2017-05-25
Test Results
Input Type: Calculated
Tester's full name: Mike Mullins
Date of test: 02/13/2017
Viscosity ASTM D 2196, RVT, No. 1 spindle 75 to 200 cps @ 20 RPM, 77°F: 130 cps
Specific gravity ASTM D 1475 1.05 to 1.10 @ 77°F: 1.09
Conditioning (18/25/50 + 5/70) Elogation ASTM D 638, minimum 35%: 56.4 %
Tensile Strength ASTM D 638 Type 1 @ 0.45 in/min, minimum 2500 psi: 2939 psi
Styrene ASTM D 2369 40% to 50 %: 47 %
PCC - SSD bond strength CTM 551 500 psi minimun @ 24 hours: 619 psi
Static Volatile Emissions, SCAQMD 309-91, maximum loss 1.0 grams: 0.5 grams
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/25/2017 ✔