Summary for Test 2023-06-14-93-2
Test performed: AASHTO T104-99r16Project Information
| Project Identifiers | Project ID: 994386 DEA: 023J7404 EFIS: 0222000079 |
|---|---|
| DIST-CO-RTE-PM | 02-LAS-395-92.0/98.5 |
| Award Date | 01/04/2023 |
| Closeout Date | 04/11/2024 |
| Work Description | HMA OVERLAY, REPLACE AC SURFACING AND RECESSED THERMOPLASTIC STRIPE. |
| Location Description | LASSEN COUNTY ABOUT 16 MILES SOUTH OF RAVENDALE FROM 0.1 MILE NORTH OF KARLO ROAD TO 1.5 MILES SOUTH OF RAMHORN ROAD |
| QA Service Level | 1 (Verified on 03/28/2023) |
Sample Information
| Sample Taken Date | 06/14/2023 | Sample Unique Key | 93 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 06/15/2023 | Sample type | Verification |
| A brief description of the sample | 2 bags of Untreated Washed Dust Sized Virgin Aggregate | The quantity of what the sample constitutes | JMF Verification |
| From where was the sample collected | Source | First name of sampler or witnessed by | Andrea |
| Last name of sampler or witnessed by | Sloaterman | Title of sampler | TET |
| Telephone number of sampler | 5306044726 | Laboratory sample identification | D79266D |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Hat Creek Construction and Materials - Ward Lake Pit - Litchfield, CA | |
| Transportation Laboratory (TL) Number | 858028 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-18-0008::Ward Lake Pit |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Untreated Sized Aggregate Stockpile | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/8 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-06-14-93
DIME Test ID: 2023-06-14-93-2
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)
Test Release Date: 2023-09-08
Test Results
Percentage of the total sample represented by each size
Size of aggregate being tested: Fine Aggregate
What type of solution was used?: Sodium sulfate
What was the condition of the solution?: Freshly prepared
Number of immersion cycles performed: 5
Input Type: Calculated
Tester's full name: Bang Nguyen
Date of test: 09/08/2023
Percentage of ⅜ inch x No. 4 material loss: 9.1 %
Percentage of No. 4 x 8 material loss: 8.5 %
Percentage of No. 8 x 16 material loss: 6.39 %
Percentage of No. 16 x 30 material loss: 9.3 %
Percentage of No. 30 x 50 material loss: 13.7 %
Fine weighted average loss: 8.7 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/8/2023 ✔