Summary for Test 2023-08-14-71-1
Test performed: AASHTO T315-22Project Information
| Project Identifiers | Project ID: 995087 DEA: 051P5904 EFIS: 0522000086 |
|---|---|
| DIST-CO-RTE-PM | 05-SCR-1-0.0/5.0 |
| Award Date | 03/22/2023 |
| Closeout Date | 08/13/2024 |
| Work Description | Cold plane, RHMA-G |
| Location Description | Watsonville area, County line to Scenic pullout |
| QA Service Level | 1 (Verified on 08/21/2023) |
Sample Information
| Sample Taken Date | 08/14/2023 | Sample Unique Key | 71 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/23/2023 |
| Sample type | Department Acceptance | A brief description of the sample | PG64-10 |
| The quantity of what the sample constitutes | 1 of 1 can | From where was the sample collected | Source |
| First name of sampler or witnessed by | M | Last name of sampler or witnessed by | MONTIEL |
| Title of sampler | QC | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | San Joaquin Refinery, Bakersfield, CA | Transportation Laboratory (TL) Number | 942341 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 64-10 |
|---|---|---|---|
| Modified | Lot number | ||
| Sublot number | Tank number | ||
| Time of sample | HMA Supplier | ||
| Certified Asphalt Supplier | San Joaquin Refinery - Bakersfield CA | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-08-14-71
DIME Test ID: 2023-08-14-71-1
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2023-08-29
Test Results
Phase: Original binder
Input Type: Measured
Tester's full name: Raul Cardenas
Date of test: 08/29/2023
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.00 %
Stress Amplitude: 0.173 kPa
Phase Angle (δ) (for the 10 cycles): 89.5 degree
Complex Modulus (G*) (for the 10 measurements): 1.431 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 1.43 kPa
General comments (publicly viewable) (Max 1000 characters): OG
Test was verified on 8/29/2023 ✔