Summary for Test 2023-08-16-51-8
Test performed: AASHTO T313-22Project Information
| Project Identifiers | Project ID: 44444 DEA: ASCP EFIS: ASCP |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for submitting Sample information for Asphalt Supplier Certification Program. |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 08/16/2023 | Sample Unique Key | 51 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 08/16/2023 | Sample type | Quality Control |
| A brief description of the sample | PG58-34M Modified Asphalt Binder | The quantity of what the sample constitutes | 1 of 2 cans |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | John |
| Last name of sampler or witnessed by | Partenen | Title of sampler | |
| Telephone number of sampler | 6614327352 | Laboratory sample identification | 5834230816 |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | San Joaquin Refinery, Bakersfield, CA | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 58-34 M |
|---|---|---|---|
| Modified | Yes | Lot number | 5834230816 |
| Sublot number | Tank number | 5005 | |
| Time of sample | 6:45am | HMA Supplier | |
| Certified Asphalt Supplier | San Joaquin Refinery - Bakersfield CA | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number | ||
| HMA Type | Not set | HMA Supplier Mix ID Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-08-16-51
DIME Test ID: 2023-08-16-51-8
Testing Lab: San Joaquin Refinery - Bakersfield
Test Method: AASHTO T313-22: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Test Release Date: 2023-09-08
Test Results
Input Type: Calculated
Tester's full name: Sandra Ponce
Date of test: 08/17/2023
Time test started: 11:12:14 HH:MM:SS
Flags issued by software during test: None
Correlation coefficient (R²): 0.999997
Regression coefficient a: 0
Regression coefficient b: 0
Regression coefficient c: 0
Load at time 0.0: 0.0 mN
Deflection at time 0.0 s: 0.000 µm
Load at time 0.5 s: 0.0 mN
Deflection at time 0.5 s: 0.000 µm
Load at 60.0 s: 0.0 mN
Beam deflection 60.0 s: 0.000 µm
Measured Stiffness Modulus 60.0 s: 100.000 MPa
Estimated Stiffness Modulus 60.0 s: 100.000 MPa
Difference between stiffness moduli 60.0 s: 0 %
Estimated m-value 60.0 s: 0.326
General comments (publicly viewable) (Max 1000 characters): Test @ -24.0C
Test was verified on 9/8/2023 ✔