DIME - Test Summary

Summary for Test 2023-06-26-50-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 994749 DEA: 120T6504 EFIS: 1222000075
DIST-CO-RTE-PM	12-ORA-57-11.5/18.6
Award Date	01/12/2023
Closeout Date	02/02/2024
Work Description	Cold plane AC Pavement and place RHMA.
Location Description	FOR CONSTRUCTION ON STATE HIGHWAY IN ORANGE COUNTY IN ORANGE, ANAHEIM, PLACENTIA, AND FULLERTON FROM 0.2 MILE SOUTH OF ORANGEWOOD AVENUE UNDERCROSSING TO 0.3 MILE NORTH OF YORBA LINDA BOULEVARD OVERCROSSING AT VARIOUS LOCATIONS
QA Service Level	1 (Verified on 07/07/2023)

Sample Taken Date	06/26/2023	Sample Unique Key	50
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	06/29/2023
Sample type	Verification	A brief description of the sample	PSUE 1/2" RHMA-G-SP 0.25% EVO
The quantity of what the sample constitutes	3 Bags of Aggregate	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	R J Noble	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0345G-23	Linked DIME Sample ID
The fabricator/manufacturer/facility name	R J Noble Orange	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0014, 91-33-0035
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut at R J Noble- Orange
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number	50R003ARSPWEO	Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2023-06-26-50

DIME Test ID: 2023-06-26-50-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2023-09-19

Input Type: Measured

Tester's full name: Friday Ofoegbu

Date of test: 07/06/2023

Mass of saturated surface dry sample (before pycnometer) (S): 500.0 grams

Mass of the pycnometer with water and aggregate (C): 965.6 grams

Mass of the pycnometer with water (B): 653.4 grams

Mass of the oven dried sample (before pycnometer) (A): 493.1 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500.0 grams

Mass of the oven dry aggregate (for absorption) (A): 493.1 grams

Test Sample Preparation: 6% Moisture

Bulk specific gravity: 2.626

Bulk specific gravity (SSD Basis): 2.662

Apparent specific gravity: 2.726

Absorption: 1.4 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 9/19/2023 ✔