Summary for Test 2023-08-14-1-1

Test performed: CTM 202-November 2011

Project Information

Project IdentifiersProject ID: 994854
DEA: 061E5804
EFIS: 0622000071
DIST-CO-RTE-PM06-KER-43,46-9.0/15.7, 20.0/27.5
Award Date03/28/2023
Closeout Date11/16/2023
Work DescriptionFOR CONSTRUCTION ON STATE HIGHWAY IN KERN COUNTY NEAR WASCO ON ROUTE 43 FROM 0.2 MILE SOUTH OF ROUTE 58 TO 0.5 MILE NORTH OF RIVERSIDE AVENUE AND ROUTE 46 FROM 0.5 MILE WEST OF ROUTE 33 TO HOLLOWAY ROAD
Location DescriptionIn District 06 On Route 43, 46
QA Service Level1 (Verified on 06/14/2023)

Sample Information

Sample Taken Date08/14/2023 Sample Unique Key1
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing08/11/2023
Sample typeDepartment Acceptance A brief description of the sample3/8″ Chips for Use in ARB Chip Seal
The quantity of what the sample constitutes2 bags 3/8" chips From where was the sample collectedSource
First name of sampler or witnessed byJason Last name of sampler or witnessed byRuiz
Title of samplerMaterials Tester Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameDelano Rock and Asphalt Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-54-0019
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedCold Feed
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/8 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix Number

Test Details

DIME Sample ID: 2023-08-14-1
DIME Test ID: 2023-08-14-1-1
Testing Lab: CT D06 - Bakersfield Field Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2023-08-14

Test Results


What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Neale Brown
Date of test: 08/14/2023
Cumulative Mass RetainedCumulative Percent Passing
1403.1 grams
0 grams100 %
0 grams100 %
0 grams100 %
0 grams100 %
0 grams100 %
0 grams100 %
11.4 grams99 %
287.4 grams80 %
1212.8 grams14 %
1385.8 grams1 %
1393.3 grams1 %
1395.9 grams1 %
1397.2 grams0 %
1397.9 grams0 %
1398.8 grams0 %
1403.1 grams
General comments (publicly viewable) (Max 1000 characters):

Test File Attachments

File NameExtensionFile SizeDate UploadedTest IDActions
06-1E5804_37018_230814_chipspdf27.70 KB08/14/20232023-08-14-1-1   Info

Test was verified on 8/14/2023