Summary for Test 2022-09-14-91-2

Test performed: AASHTO T315-22

Project Information

Project IdentifiersProject ID: 993299
DEA: 022J3904
EFIS: 0221000073
DIST-CO-RTE-PM02-SHA-44-45.5/51.6
Award Date11/16/2021
Closeout Date11/23/2022
Work DescriptionHMA OVERLAY, REPLACE AC SURFACING AND SHOULDER BACKING.
Location DescriptionSHASTA COUNTY NEAR VIOLA FROM 3.0 MILES EAST OF DEER FLAT ROAD TO 0.5 MILE EAST OF BRIDGE CREEK ROAD
QA Service Level1 (Verified on 10/18/2021)

Sample Information

Sample Taken Date09/14/2022 Sample Unique Key91
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/25/2023
Sample typeDepartment Acceptance A brief description of the samplepg 58-34m
The quantity of what the sample constitutes1 of 1 can From where was the sample collectedSource
First name of sampler or witnessed byc Last name of sampler or witnessed byrogers
Title of samplerplant inspector Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility namenorth state asphalt Transportation Laboratory (TL) Number852751
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeAsphalt Binder Performance GradePG 58-34 M
ModifiedNo Lot number
Sublot number Tank number
Time of sample HMA Supplier
Certified Asphalt SupplierValero Marketing & Supply - Benicia CA MultigradeNo
Multigrade Type Asphalt Binder Mix Number

Test Details

DIME Sample ID: 2022-09-14-91
DIME Test ID: 2022-09-14-91-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2026-04-06

Test Results


Phase: RTFO residue
Input Type: Measured
Tester's full name: Raul Cardenas
Date of test: 08/02/2023
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.05 %
Stress Amplitude: 0.664 kPa
Phase Angle (δ) (for the 10 cycles): 55.1 degree
Complex Modulus (G*) (for the 10 measurements): 6.605 kPa
Test Temperature (Specimen 1): 58.0 C
Dynamic Shear, G*/sin(δ): 8.05 kPa
General comments (publicly viewable) (Max 1000 characters): RTFO

Test was verified on 4/6/2026