Summary for Test 2023-06-16-55-2

Test performed: AASHTO T315-22

Project Information

Project IdentifiersProject ID: 994345
DEA: 023J7804
EFIS: 0222000083
DIST-CO-RTE-PM02-TRI-36-15.8/16.9,20.5/24.5
Award Date12/22/2022
Closeout Date08/22/2023
Work DescriptionPLACE HOT MIX ASPHALT (TYPE A) AND REPLACE ASPHALT CONCRETE SURFACING.
Location DescriptionTRINITY COUNTY NEAR FOREST GLEN FROM 1.1 MILES WEST OF SOUTH FORK TRINITY RIVER BRIDGE TO SOUTH FORK TRINITY RIVER BRIDGE NO. 05-0026 AND FROM UPPER RATTLESNAKE CREEK BRIDGE NO. 05-0073 TO 0.3 MILE WEST OF TRINITY PINES ROAD
QA Service Level1 (Verified on 03/28/2023)

Sample Information

Sample Taken Date06/16/2023 Sample Unique Key55
Date that the sample was received by the laboratory/organization performing the testing07/26/2023 Sample typeDepartment Acceptance
A brief description of the samplepg 58-22 The quantity of what the sample constitutes1 of 1 can
From where was the sample collectedSource First name of sampler or witnessed byc
Last name of sampler or witnessed byrogers Title of samplerplant inspector
Telephone number of sampler Laboratory sample identification
Linked DIME Sample ID The fabricator/manufacturer/facility namenorth state asphalt
Transportation Laboratory (TL) NumberC852763 Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier Structure name
Bid ItemNot set

Material Information

Material TypeAsphalt Binder Performance GradePG 58-34 M
ModifiedNo Lot number
Sublot number Tank number
Time of sample HMA Supplier
Certified Asphalt SupplierValero Marketing & Supply - Benicia CA MultigradeNo
Multigrade Type Asphalt Binder Mix Number
HMA TypeNot set HMA Supplier Mix ID NumberNot set

Test Details

DIME Sample ID: 2023-06-16-55
DIME Test ID: 2023-06-16-55-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2023-08-08

Test Results


Phase: RTFO residue two specimens
Input Type: Measured
Tester's full name: Raul Cardenas
Date of test: 08/01/2023
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.05 %
Stress Amplitude: 0.698 kPa
Phase Angle (δ) (for the 10 cycles): 55.1 degree
Complex Modulus (G*) (for the 10 measurements): 6.948 kPa
Test Temperature (Specimen 1): 58.0 C
Dynamic Shear, G*/sin(δ): 8.47 kPa
Stress Amplitude 2: 0.416 kPa
Phase Angle 2 (δ) (for the 10 cycles): 56.1 degree
Complex Modulus 2 (G*) (for the 10 measurements) : 4.141 kPa
Test Temperature (Specimen 2): 64.0 C
Dynamic Shear 2, G*/sin(δ): 4.99 kPa
Delta at 2.2 kpa: 56.9 degree
General comments (publicly viewable) (Max 1000 characters): RTFO

Test was verified on 8/8/2023 ✔