DIME - Test Summary

Summary for Test 2023-04-29-11-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 993446 DEA: 120J34U4 EFIS: 1218000034
DIST-CO-RTE-PM	12-ORA-55,55-29.6,R6.4/10.3
Award Date	05/27/2022
Closeout Date	Not set
Work Description	CONSTR BRIDGES, RW, SW, JPCP, HMA PVMT, DRAINAGE AND ELECT SYSTEMS.
Location Description	ORANGE COUNTY IN IRVINE, SANTA ANA, AND TUSTIN ON ROUTE 5 AT NEWPORT AVENUE UNDERCROSSING AND ON ROUTE 55 FROM 0.4 MILE NORTH OF ROUTE 55/405 SEPARATION TO 0.1 MILE SOUTH OF ROUTE 5/55 SEPARATION
QA Service Level	1 (Verified on 06/24/2022)

Sample Taken Date	04/29/2023	Sample Unique Key	11
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	05/26/2023
Sample type	Verification	A brief description of the sample	JMF 1/2" RHMA-G-SP 0.5% LAS
The quantity of what the sample constitutes	4 Bags of Comb. 1/2" Agg., 1 Bag each of CRM Scrap and Hi-Nat	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Vulcan	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0274G-23	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Vulcan Materials - Corona Drum	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0027, 91-19-0073
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut at Vulcan Materials-Corona Drum
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number	326120 CORD SJR	Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2023-04-29-11

DIME Test ID: 2023-04-29-11-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2023-09-05

Input Type: Measured

Tester's full name: Friday Ofoegbu

Date of test: 05/31/2023

Mass of saturated surface dry sample (before pycnometer) (S): 500.0 grams

Mass of the pycnometer with water and aggregate (C): 971.9 grams

Mass of the pycnometer with water (B): 660.4 grams

Mass of the oven dried sample (before pycnometer) (A): 494.6 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500.0 grams

Mass of the oven dry aggregate (for absorption) (A): 494.6 grams

Test Sample Preparation: 6% Moisture

Bulk specific gravity: 2.624

Bulk specific gravity (SSD Basis): 2.653

Apparent specific gravity: 2.701

Absorption: 1.1 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 9/5/2023 ✔