Summary for Test 2023-05-05-60-10
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 214486 DEA: 080K1224 EFIS: 0815000244 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-15-R28.6/37.5 |
| Award Date | 09/24/2021 |
| Closeout Date | 11/03/2025 |
| Work Description | REHBILIATATE EXISTING MAINLINE AND RAMP PAVEMENT |
| Location Description | SAN BERNARDINO COUNTY IN HESPERIA AND VICTORVILLE FROM OAK HILL ROAD OVERCROSSING TO 0.1 MILE SOUTH OF BEAR VALLEY ROAD OVERCROSSING |
| QA Service Level | 1 (Verified on 06/23/2021) |
Sample Information
| Sample Taken Date | 05/05/2023 | Sample Unique Key | 60 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/30/2023 |
| Sample type | Verification | A brief description of the sample | JMF 1/2" HMA-A-SP R25 1% LSM |
| The quantity of what the sample constitutes | 3 Bags of Lime Treated Agg., 3 Bags each 1/2" & 3/8", 2 Bags of Sand, 2 Bags of RAP | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Beu | Last name of sampler or witnessed by | Alfano |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0279A-23 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Blue Diamond Materials-Victorville | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-36-0046, 91-36-0022 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt Cut at Blue Diamond Victorville Plant | |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 1/2 inch |
| The concrete mix design number | 300215 - CPC R25 | Lot number | |
| Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-05-05-60
DIME Test ID: 2023-05-05-60-10
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2023-09-06
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: Yes
For Combined Gradation only, use #40 Sieve?: No
Input Type: Calculated
Tester's full name: Satish Jain/M. Campos/Ali R
Date of test: 06/13/2023
| Sieve Size | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 100 % | ||||||
| 100 % | ||||||
| 100 % | ||||||
| 100 % | ||||||
| 100 % | ||||||
| 100 % | ||||||
| 97 % | ||||||
| 87 % | ||||||
| 70 % | ||||||
| 55 % | ||||||
| 42 % | ||||||
| 28 % | ||||||
| 17 % | ||||||
| 8 % | ||||||
| 4 % | ||||||
General comments (publicly viewable) (Max 1000 characters): Comb. Agg. Gradation W/Rap Gradation Correlation Factors
Test was verified on 9/6/2023 ✔
