DIME - Test Summary

Summary for Test 2023-05-11-65-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 993815 DEA: 081C0814 EFIS: 0816000086
DIST-CO-RTE-PM	08-RIV-10-R60.7/R74.3
Award Date	03/28/2022
Closeout Date	01/21/2026
Work Description	I-10 PAVEMENT REHABILITATION (SEGMENT 1) PROJECT
Location Description	Coachella
QA Service Level	1 (Verified on 05/03/2022)

Sample Taken Date	05/11/2023	Sample Unique Key	65
Date that the sample was received by the laboratory/organization performing the testing	05/18/2023	Sample type	Verification
A brief description of the sample	JMF 1/2" HMA-A-SP R25 0.5% LAS	The quantity of what the sample constitutes	3 Bags of each Agg. 1/2" and 3/8", 3 Bags of Sand, 2 Bags of RAP
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	Martin
Last name of sampler or witnessed by	Marietta QC	Title of sampler
Telephone number of sampler		Laboratory sample identification	0261A-23
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Martin Marietta - Coachella
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0084
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut at Martin Marietta Coachella
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number	41217155	Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2023-05-11-65

DIME Test ID: 2023-05-11-65-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2023-08-24

Input Type: Measured

Tester's full name: Friday Ofoegbu

Date of test: 05/27/2023

Mass of saturated surface dry sample (before pycnometer) (S)	500.0 grams
Mass of the pycnometer with water and aggregate (C)	961.9 grams
Mass of the pycnometer with water (B)	648.8 grams
Mass of the oven dried sample (before pycnometer) (A)	496.9 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.0 grams
Mass of the oven dry aggregate (for absorption) (A)	496.9 grams
Test Sample Preparation	6% Moisture
Bulk specific gravity	2.659
Bulk specific gravity (SSD Basis)	2.675
Apparent specific gravity	2.703
Absorption	0.6 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 8/24/2023 ✔