Summary for Test 2023-07-19-7-4
Test performed: AASHTO T275-07r12Project Information
| Project Identifiers | Project ID: 994602 DEA: 09392004 EFIS: 0922000036 |
|---|---|
| DIST-CO-RTE-PM | 09-INY-395-44.9/50.9,52.9/54.5 |
| Award Date | 04/27/2023 |
| Closeout Date | 12/22/2023 |
| Work Description | HOT MIX ASPHALT (TYPE-A), SHOULDER BACKING, AND STRIPING. |
| Location Description | INYO COUNTY NEAR LONE PINE FROM 1.3 MILES SOUTH OF COTTONWOOD ROAD TO 2 MILES NORTH OF BARTLETT ROAD AND FROM 0.3 MILE SOUTH OF LUBKEN CANYON ROAD TO 1.1 MILES SOUTH OF GOLF COURSE ROAD |
| QA Service Level | 1 (Verified on 08/02/2023) |
Sample Information
| Sample Taken Date | 07/19/2023 | Sample Unique Key | 7 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/20/2023 |
| Sample type | Department Acceptance | A brief description of the sample | 3/4" HMA Type A |
| The quantity of what the sample constitutes | 6 boxes | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Kristen | Last name of sampler or witnessed by | Cox |
| Title of sampler | QC | Telephone number of sampler | |
| Laboratory sample identification | PSU 1 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Blue Diamond-Victorville | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | |
| Sublot number | HMA Mix Number | ||
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
DIME Sample ID: 2023-07-19-7
DIME Test ID: 2023-07-19-7-4
Testing Lab: CT D09 - Bishop Field Laboratory
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Test Release Date: 2023-07-21
Test Results
Number of tests: 3
What test procedure is performed?: Method A
Input Type: Measured
Tester's full name: Derek Carrington
Date of test: 07/20/2023
Mass of the dry specimen in air: 4790.0 g
Mass of the dry specimen plus paraffin coating in air: 4850.3 g
Mass of the dry specimen plus paraffin coating in water: 2777.7 g
Specific gravity of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 2 of the dry specimen in air: 4788.9 g
Mass 2 of the dry specimen plus paraffin coating in air: 4846.3 g
Mass 2 of the dry specimen plus paraffin coating in water: 2779.1 g
Specific gravity 2 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 3 of the dry specimen in air: 4789.8 g
Mass 3 of the dry specimen plus paraffin coating in air: 4849.7 g
Mass 3 of the dry specimen plus paraffin coating in water: 2776.5 g
Specific gravity 3 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Bulk Specific Gravity: 2.388
Bulk Specific Gravity 2: 2.390
Bulk Specific Gravity 3: 2.387
Average Bulk Specific Gravity: 2.388
General comments (publicly viewable) (Max 1000 characters): PSU-01
Test was verified on 7/21/2023 ✔
