Summary for Test 2023-07-08-4-1
Test performed: AASHTO T27-14Project Information
| Project Identifiers | Project ID: 993703 DEA: 070W0404 EFIS: 0721000028 MINOR: 11A3471 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-90-0.9/T3.3 |
| Award Date | 06/09/2022 |
| Closeout Date | 02/05/2024 |
| Work Description | PCC GRINDING, SLAB REPLACEMENT, SLURRY SEAL & COLD PLANE AC PAVEMENT. |
| Location Description | LOS ANGELES COUNTY IN LOS ANGELES AND CULVER CITY FROM ROUTE 1 TO SLAUSON AVENUE |
| QA Service Level | 1 (Verified on 05/11/2022) |
Sample Information
| Sample Taken Date | 07/08/2023 | Sample Unique Key | 4 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 07/10/2023 | Sample type | Department Acceptance |
| A brief description of the sample | 1/2 RHMA | The quantity of what the sample constitutes | 600 tons |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | victor |
| Last name of sampler or witnessed by | Pham | Title of sampler | |
| Telephone number of sampler | 2137924794 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Vulcan Irwindale | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0035 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | 1/2 RHMA-G | The fabricator/manufacturer designation for the sample | |
| The plant number | Irwindale | A detailed description of where the material sample was collected | Belt Discharge |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
| The concrete mix design number | 326120M IRW LTR | Lot number | |
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-07-08-4
DIME Test ID: 2023-07-08-4-1
Testing Lab: CT D07 - Plant Services, Unit 1841
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2023-07-20
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Measured
Tester's full name: Victor Pham
Date of test: 07/10/2023
| Cumulative Mass Retained | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 3230.0 grams | ||||||
| grams | % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 130.0 grams | 96 % | |||||
| 454.0 grams | 86 % | |||||
| 1934.0 grams | 40 % | |||||
| 375 grams | ||||||
| 149.0 grams | 24 % | |||||
| 217.0 grams | 17 % | |||||
| 271.0 grams | 11 % | |||||
| 319.0 grams | 6 % | |||||
| 344.0 grams | 3 % | |||||
| 355.0 grams | 2.1 % | |||||
| 355.3 grams | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/20/2023 ✔