Summary for Test 2023-07-06-14-1
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 214649 DEA: 07316004 EFIS: 0715000194 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-14-60.70 |
| Award Date | 02/07/2023 |
| Closeout Date | Not set |
| Work Description | REHABILITATION FOR THE ON/OFF RAMPS AND ADJACENT SHOULDERS. UPGRADING METAL BEAM GUARDRAILS, AC DIKES, SIGN PANELS, CURB RAMPS, TRAFFIC LOOPS DETECTORS, AND SOME OTHER HIGHWAY APPURTENANCES. |
| Location Description | ROUTE 14 FROM PALMDALE BLVD TO KERN COUNTRY LINE. |
| QA Service Level | 1 (Verified on 01/29/2020) |
Sample Information
| Sample Taken Date | 07/06/2023 | Sample Unique Key | 14 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/06/2023 |
| Sample type | Department Acceptance | A brief description of the sample | 1" X #4 |
| The quantity of what the sample constitutes | 170 CY | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Kevin | Last name of sampler or witnessed by | Hopkins |
| Title of sampler | Plant Inspector | Telephone number of sampler | |
| Laboratory sample identification | KH106F | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | SHORTLOAD CONCRETE INC | Transportation Laboratory (TL) Number | C070623A |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0046 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | Shortload Volumetric Palmdale | A detailed description of where the material sample was collected | Stockpile @ Yard |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1 inch | |
| The concrete mix design number | CTS-65-GBR | Lot number | |
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-07-06-14
DIME Test ID: 2023-07-06-14-1
Testing Lab: CT D07 - Plant Services
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2023-07-20
Test Results
What size aggregate is being tested?: 1 in. x No. 4 - Coarse Aggregate
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Kevin Hopkins
Date of test: 07/07/2023
| Cumulative Mass Retained | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 10034 grams | ||||||
| 0 grams | 100 % | |||||
| 54 grams | 99 % | |||||
| 1602 grams | 84 % | |||||
| 5610 grams | 44 % | |||||
| 8318 grams | 17 % | |||||
| 9672 grams | 4 % | |||||
| 9822 grams | 2 % | |||||
| 9964 grams | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/20/2023 ✔