Summary for Test 2023-04-09-2-3
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 993844 DEA: 070W1004 EFIS: 0721000043 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-5-31.8/42.6 |
| Award Date | 06/28/2022 |
| Closeout Date | Not set |
| Work Description | PLACE RUBBERIZED HMA (GAP GRADED) |
| Location Description | LOS ANGELES COUNTY IN BURBANK AND LOS ANGELES FROM COHASSET STREET UNDERCROSSING TO ROXFORD STREET UNDERCROSSING |
| QA Service Level | 1 (Verified on 09/20/2022) |
Sample Information
| Sample Taken Date | 04/09/2023 | Sample Unique Key | 2 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 04/12/2023 |
| Sample type | Department Acceptance | A brief description of the sample | Coarse and fine aggregate |
| The quantity of what the sample constitutes | Two Bags | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Baher | Last name of sampler or witnessed by | Fakhoury |
| Title of sampler | Telephone number of sampler | 2137937180 | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | George Throop | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0025 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Ground Pile | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | fine | |
| The concrete mix design number | 2010-007 | Lot number | |
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-04-09-2
DIME Test ID: 2023-04-09-2-3
Testing Lab: CT D07 - Plant Services
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2023-07-06
Test Results
What size aggregate is being tested?: Fine Aggregate
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Baher Fakhoury
Date of test: 04/19/2023
| Sieve Size | Cumulative Mass Retained | Cumulative Percent Passing | ||||
|---|---|---|---|---|---|---|
| 508.5 grams | ||||||
| 0.0 grams | 100 % | |||||
| 22.7 grams | 96 % | |||||
| 77.0 grams | 85 % | |||||
| 150.0 grams | 71 % | |||||
| 263.0 grams | 48 % | |||||
| 405.0 grams | 20 % | |||||
| 481.0 grams | 5 % | |||||
| 498.0 grams | 2 % | |||||
| 508.5 grams | ||||||
General comments (publicly viewable) (Max 1000 characters): The Fine gradation is out of operating range but within contract compliance on sieve # 16
Test was verified on 7/6/2023 ✔