Summary for Test 2023-05-31-70-2

Test performed: AASHTO T315-22

Project Information

Project IdentifiersProject ID: 994401
DEA: 09379304
EFIS: 0919000007
DIST-CO-RTE-PM09-INY-127-21.0/34.5,41.8/49.4
Award Date01/23/2023
Closeout Date12/27/2023
Work DescriptionPARTIAL DEPTH RECYCLE AND HOT MIX ASPHALT (TYPE A).
Location DescriptionINYO COUNTY NEAR SHOSHONE FROM 4.6 MILES NORTH OF ROUTE 178 WEST TO 7.6 MILES SOUTH OF ROUTE 190 AND FROM 0.3 MILE SOUTH OF ROUTE 190 TO NEVADA STATE LINE
QA Service Level1 (Verified on 08/02/2023)

Sample Information

Sample Taken Date05/31/2023 Sample Unique Key70
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/06/2023
Sample typeDepartment Acceptance A brief description of the samplepg 70-10
The quantity of what the sample constitutes1 of 1 can From where was the sample collectedJob Site
First name of sampler or witnessed bycolton Last name of sampler or witnessed byC
Title of samplerqc Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameWulfenstein Construction Transportation Laboratory (TL) Number998414
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 70-10
ModifiedNo Lot number
Sublot number Tank number
Time of samplePM HMA Supplier
Certified Asphalt SupplierErgon Asphalt & Emulsions Incorporated - Las Vegas NV MultigradeNo
Multigrade Type Asphalt Binder Mix Number

Test Details

DIME Sample ID: 2023-05-31-70
DIME Test ID: 2023-05-31-70-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2023-07-05

Test Results


Phase: RTFO residue
Input Type: Measured
Tester's full name: Raul Cardenas
Date of test: 06/20/2023
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.272 kPa
Phase Angle (δ) (for the 10 cycles): 85.9 degree
Complex Modulus (G*) (for the 10 measurements): 2.725 kPa
Test Temperature (Specimen 1): 70.0 C
Dynamic Shear, G*/sin(δ): 2.73 kPa
General comments (publicly viewable) (Max 1000 characters): RTFO

Test was verified on 7/5/2023