Summary for Test 2023-03-02-9-1
Test performed: CTM 523-May 2020Project Information
| Project Identifiers | Project ID: 213750 DEA: 120K0224 EFIS: 1214000097 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-5-14.5/17.1 |
| Award Date | 03/05/2019 |
| Closeout Date | 03/13/2025 |
| Work Description | South County Improvement Project (Phase 2 - Oso/Alicia) CONST BRIDGES, RW, SW, HMA PVMT, JPCP, DRAINAGE, AND ELECT SYSTEMS. |
| Location Description | ORANGE COUNTY IN MISSION VIEJO AND LAGUNA HILLS FROM 0.7 MILE SOUTH OF OSO PARKWAY OVERCROSSING TO 0.3 MILE SOUTH OF ALICIA PARKWAY OVERCROSSING |
| QA Service Level | 1 (Verified on 04/15/2019) |
Sample Information
| Sample Taken Date | 03/02/2023 | Sample Unique Key | 9 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 03/02/2023 | Sample type | Quality Assurance |
| A brief description of the sample | 1", 3/8" & SAND | The quantity of what the sample constitutes | 300 CU.YDS |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | JIMMY CUONG |
| Last name of sampler or witnessed by | PHAM | Title of sampler | Lab Technician |
| Telephone number of sampler | 9492798487 | Laboratory sample identification | 23-0179 |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | CEMEX - IRVINE | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Concrete | The concrete mix design number | 1605760 |
|---|---|---|---|
| The truck number from where the sample was collected | 10067844 | The batch plant ticket number from where the sample was collected | 30648130 |
| Concrete batch plant | The fabricator/manufacturer designation for the sample | ||
| A detailed description of where the material sample was collected | Stockpile | Where the material sample would have been placed if not sampled | |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-03-02-9
DIME Test ID: 2023-03-02-9-1
Testing Lab: CT D12 - Huntington Beach Field Laboratory
Test Method: CTM 523-May 2020: Method of Test for Flexural Strength of Concrete
Test Release Date: 2023-06-15
Test Results
Number of specimens: 2
Unit system used?: US Units
Does the testing machine measure load or stress on the beam specimen?: Load
Fracture initiates in the tension surface: Within the Middle Third of the Span Length
Is a beam dimensional correction factor used?: No
Input Type: Calculated
Tester's full name: Dan Morris
Date of test: 06/15/2023
Identification number: 23-0179
Width of specimen: 6.0 inch
Width of specimen 2: 6.1 inch
Depth of specimen: 6.1 inch
Depth of specimen 2: 6.1 inch
Span length of specimen: 18 inch
Span length of specimen 2: 18 inch
Maximum load applied: 3840 lb
Maximum load applied 2: 5420 lb
Curing history and apparent moisture condition of the specimen: lime water bath
If specimen was capped, ground or if leather shims were used: 0
Defects in specimen: 0
Age of specimen: 10 days
Age of specimen in hours: 0 hours
Modulus of rupture: 330 psi
Modulus of rupture 2: 460 psi
Modulus of rupture average: 400 psi
General comments (publicly viewable) (Max 1000 characters):
Test File Attachments
| File Name | Extension | File Size | Date Uploaded | Test ID | Actions |
|---|---|---|---|---|---|
| 23-0179 | 211.72 KB | 06/15/2023 | 2023-03-02-9-1 | Info |
Test was verified on 6/15/2023 ✔