Summary for Test 2023-05-16-74-2
Test performed: AASHTO T315-22Project Information
Project Identifiers | Project ID: 994877 DEA: 101R4204 EFIS: 0123000142 |
---|---|
DIST-CO-RTE-PM | 10-STA-5,5,33-0.0/2.0/27.0/14.5 |
Award Date | Not set |
Closeout Date | 08/23/2023 |
Work Description | Not set |
Location Description | Not set |
QA Service Level | 1 (Verified on 06/13/2023) |
Sample Information
Sample Taken Date | 05/16/2023 | Sample Unique Key | 74 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/09/2023 |
Sample type | Department Acceptance | A brief description of the sample | PG 64-28M |
The quantity of what the sample constitutes | 1 OF 1 | From where was the sample collected | Job Site |
First name of sampler or witnessed by | T | Last name of sampler or witnessed by | T |
Title of sampler | TECH | Telephone number of sampler | |
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Albina Chowchilla | Transportation Laboratory (TL) Number | 938470 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Asphalt Binder | Performance Grade | PG 64-28 M |
---|---|---|---|
Modified | Yes | Lot number | 1 |
Sublot number | 5 | Tank number | |
Time of sample | HMA Supplier | ||
Certified Asphalt Supplier | Albina Asphalt - Chowchilla CA | Multigrade | No |
Multigrade Type | Asphalt Binder Mix Number |
Test Details
DIME Sample ID: 2023-05-16-74
DIME Test ID: 2023-05-16-74-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2023-06-16
Test Results
Phase: RTFO residue
Input Type: Measured
Tester's full name: Raul Cardenas
Date of test: 06/14/2023
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.437 kPa
Phase Angle (δ) (for the 10 cycles): 64.7 degree
Complex Modulus (G*) (for the 10 measurements): 4.368 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 4.83 kPa
General comments (publicly viewable) (Max 1000 characters): RTFO
Test was verified on 6/16/2023 ✔