Summary for Test 2023-05-19-53-1

Test performed: AASHTO T315-22

Project Information

Project IdentifiersProject ID: 994401
DEA: 09379304
EFIS: 0919000007
DIST-CO-RTE-PM09-INY-127-21.0/34.5,41.8/49.4
Award Date01/23/2023
Closeout Date12/27/2023
Work DescriptionPARTIAL DEPTH RECYCLE AND HOT MIX ASPHALT (TYPE A).
Location DescriptionINYO COUNTY NEAR SHOSHONE FROM 4.6 MILES NORTH OF ROUTE 178 WEST TO 7.6 MILES SOUTH OF ROUTE 190 AND FROM 0.3 MILE SOUTH OF ROUTE 190 TO NEVADA STATE LINE
QA Service Level1 (Verified on 08/02/2023)

Sample Information

Sample Taken Date05/19/2023 Sample Unique Key53
Date that the sample was received by the laboratory/organization performing the testing06/06/2023 Sample typeDepartment Acceptance
A brief description of the samplepg 70-10 The quantity of what the sample constitutes1 of 1 can
From where was the sample collectedJob Site First name of sampler or witnessed bycolton
Last name of sampler or witnessed byC Title of samplerqc
Telephone number of sampler Laboratory sample identification
Linked DIME Sample ID The fabricator/manufacturer/facility nameWulfenstein Construction
Transportation Laboratory (TL) Number998412 Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier Structure name
Bid ItemNot set

Material Information

Material TypeAsphalt Binder Performance GradePG 70-10
ModifiedNo Lot number
Sublot number Tank number
Time of samplePM HMA Supplier
Certified Asphalt SupplierErgon Asphalt & Emulsions Incorporated - Las Vegas NV MultigradeNo
Multigrade Type Asphalt Binder Mix Number
HMA TypeNot set HMA Supplier Mix ID NumberNot set

Test Details

DIME Sample ID: 2023-05-19-53
DIME Test ID: 2023-05-19-53-1
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2023-06-07

Test Results


Phase: Original binder
Input Type: Measured
Tester's full name: Raul Cardenas
Date of test: 06/07/2023
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.00 %
Stress Amplitude: 0.165 kPa
Phase Angle (δ) (for the 10 cycles): 88.1 degree
Complex Modulus (G*) (for the 10 measurements): 1.375 kPa
Test Temperature (Specimen 1): 70.0 C
Dynamic Shear, G*/sin(δ): 1.38 kPa
General comments (publicly viewable) (Max 1000 characters): OG

Test was verified on 6/7/2023 ✔